The CL-86 HALCONES is a full tower chassis which measures 520mm x 527mm x 230mm (LxWxH). The CL-86 HALCONES supports graphics cards up to 330mm in length and even has an optional brace bracket to support those large cards. Another optional accessory is the PSU shroud; both optional pieces are not included. HALCONES comes with one 200mm red LED intake fan positioned in the front of the case and one 120mm red plastic fan for the rear exhaust. There is also a built in fan controller for up to four fans to be adjusted between 30% and 100% RPM. The HALCONES has four 5.25 front bays for ODDs or reservoirs for liquid cooling and all four positions are tool-less installation. There are also seven bays for 3.5” HDDs with tool-less installation, but all seven can be used to house a 2.5” drive. The large HALCONES can support two more 200mm fans, one on the top, and one on the side panel (Both positions also provide support for 120mm and 140mm fans). There is also support for an additional 140/120mm intake fan on the bottom. HALCONES also sports a large “7” shaped window for viewing components.