I get bored easily. So I decide things need fans and custom work to make them worthy of sitting on my desk.
This is a reference pic if you need one:
edited the link-AF
Just some basic mods here
Sanded off Linksys logo from the front.
Taped off the stickers and face.
Wiped off Linksys from the top with a little Goo Gone
Cut and mounted the fan
(realized to flow the fan in, it would need more space in the front)
Cut off the flange from the top of the face
This is my first time using Bondo in a mod, I think it went well
Flowed the fan in to the top, this fan had no mounts on the outside anyway.
Filled in the stack-able slots in the top with Bondo also
Added the socket cap screws and decorative washers
Then the paint, the pics don't do it justice. its like a mirror.
(secret is using Duplicolor and steel wool between coats but, only when its dry dry!)
On with the pics
I know there are some flaws in the paint but, I put to much time in to the rest to fix those spots.