This sorta started out as an idea one friday night..... and was pretty much done the following day.
I'd always wanted a proper workshop monitor solution as well as a clean modern work area to mod on.
the first part of the Tri-Mon mod was to just add it to the old workarea. Inturn the following week the work area and bench were also ...... modded!
First thing was to crack 3 15" LCD's layem out and remove any unwanted bits.
The feature part of this mod will be its channeled ad bolted plex frame.
The 12mm thick plex is routed, the channel is for the LCD panels to sit in.
To give the unit some strenght and a silghtly angled outer LCD's look the upper and lower frams are bent a bit.
The upper and lower rails are drilled and countersunk for SS Hex heads.
The ends are added and glued the whole frame is bolted together .