Page 1 of 4 123 ... LastLast
Results 1 to 10 of 32

Thread: Project: Mod in a Week // Fallout Cause SP (True

  1. #1

    Project: Mod in a Week // Fallout Cause SP (True

    Hi Everyone,

    This is the third and final mod of the season for me. I am currently waiting for my philips ambx to arrive for my "AIO AL" (a.k.a. "Nameless" mod also posted on here) and to get my hands dirty on finishing the remake of the horns and other details on "Diabolo" (also posted on here). All three will be on show at the MLP event in Murcia, Spain from the 6th to the 11th of December.

    Fallout Cause SP (Slim & Passive) is the succesor to my fav mod of my own creation "Fallout Cause", it was just a paintjob yet it was before I got in to making worklogs and I´ve learnt so much since then that I want to do something new in the same style as FC was.

    About the conditions, maybe some of you remember my previous "Mod in a Week" project (a.k.a. Acid Burn), the conditions are the same, Start to Finish happens within a week, starting to day, Saturday 26-11-11 so it will be finished by Saturday the 3rd of December as the latest.

    All products needed have to be bought/ordered and received within this period. This of course puts limitations on what I can use but that´s also part of the fun in this kind of project.

    I chose to start today as the products from the sponsor for this project arrived.

    Informatica Outlets is simply the must go to website in Spain for great deals on hardware and all needed components to build a PC. So thank you very much for your sponsorship on this project!

    The products sponsored for this project are:

    B-Move Slim II M-ATX low profile case

    Intel Celeron Dual Core E3400

    ASUS EN210 GeForce

    Gigabyte G41MT-S2PT Motherboard

    Other products sponsored include a memory card reader for the case, a 250gb seagate barracuda sata2 hard drive and an LG CD/DVD rewriter.

    As the name of the project suggests, I am aiming for making the whole computer passive, i.e. no fans, which is why I´ve gone for the ASUS 210 low profile silent GPU, and the celeron intel cpu, as it´s a low end basic cpu, it should be the easiest socket 775 cpu to cool without fans, just a heatsink and decent thermal paste. Other products I´ve acquired today for this project are:

    Thermaltake Mini-Typhoon CPU Cooler

    2x2Gb Corsair XMS3 1600Mhz (I know this mobo supports up to 1333 but its fine, it will help keep the ram cool to underclock it plus I got a simply great deal on them).

    Let´s start then.

    1st Day - Saturday 26-11-2011

    So I´ve done a quick bench-test to make sure all the hardware is working fine and in deed, no problems whatsoever.

    Because the B-Move Slim II is a low profile m-atx case I pressume meant for an HTPC, most aftermarket heatsinks will not fit, but I can´t use the stock intel heatsink because it´s cooling power is virtually non-existant without a fan. So I´ve gone for the thermaltake mini-typhoon as I got a great deal on it and it has a decent copper surface that should keep the cpu cool enough without a fan. So I mounted it with Noctua NX-1 thermalpaste, and went on to do some temp testing without a mounted fan. On idle I get 54c, on stress testing, it doesn´t go over 76c now, this are high temps for such a cpu, but remember it´s being passive cooled and the temps are within safe boundaries so I can check that off the list.

    Again because the case is low profile, the cooler will not fit even without a fan, I knew this, hell, I wanted this to happen so I could cut a hole on the side of the case to expose the copper which will add to the final look, if any of you have seen my original Fallout Cause, you´ll know exactly what I mean : )

    So, 1st, let´s cut the hole:

    Now to test it on the case:

    Very nice fit! next issue, the cpu cooler´s mounting possition means that the ram doesn´t fit because of it´s cooler, thing is, I like the cooler and rather not have to shave the trimmings off, so, did some measurements, and it would seem cutting off one of the cpu cooler´s pipes is the way to go, so that´s what I did:

    Now for mounting tests:

    Now as you can see it fits fine but its in contact with the ram stick by very little, my question is, would this affect anything in any way? would it transfer heat to the ram heatsink or the other way round? Should I trim the ram heatsink?

    That´s it for today, tomorrow I prep further modification to the case, I am planning on openings and signs of aging and damage caused by rust and the extreme conditions of a fallout post-apocalyptic wasteland.

    Thanks for reading! : )

    EDIT: Just though I´d add based on a response on another forum, that I was very carefull when cutting the heatpipe in case I needed to weld it back on due to there being liquid inside that evaporates when heating, but there is nothing inside, with a bit of research I found that, not all coolers have this inside, is this normal? I know this is a low end cooler but, normal? thanks!

  2. #2
    A Loganberry Agent FredCompany's Avatar
    Join Date
    Feb 2011
    Kent, England

    Project: Mod in a Week // Fallout Cause SP (True

    Cutting that pipe off will have made it even hotter
    The RAM heatsink touching it shouldn't make a massive difference, unless the RAM is really hot

  3. #3

    Project: Mod in a Week // Fallout Cause SP (True

    I think I should´ve posted the results of the test I did after cutting it off, idle temp increased in 1c and stress test temp increased in 2-2.5c so not much different, provably because of the 6 pipes not being in a parallel configuration, not sure. About the middle pipe touching the final lip of the ram heatsink, I will be trimming such lip to prevent any possible increase in temp and aesthetically I believe it won´t change almost at all.

    Thanks for the comment : )

    EDIT: Just though I´d add based on a response on another forum, that I was very carefull when cutting the heatpipe in case I needed to weld it back on due to there being liquid inside that evaporates when heating, but there is nothing inside, with a bit of research I found that, not all coolers have this inside, is this normal? I know this is a low end cooler but, normal? thanks!

  4. #4

    Project: Mod in a Week // Fallout Cause SP (True

    2nd Day - Sunday 27-11-11

    Today is destruction day, I will make all the destroyed sections of the case to give it that fallout rusted out/cannon´d out look. When I get to the painting part I will aid this look by giving a rust look to all the edges and adding epoxy to simulate edges fusing togueter due to rust (i.e. the grills).

    First thing however, is to trim that last lip of the memory module heatsink that´s driving me mad due to it being in contact with the cpu cooler, so here we go:

    Much better, it´s barely noticeable and it is no longer in contact with the cpu heatsink.

    Now it´s dremel time, I have to say I´m surprised at how thick and strong the metal is on this case, specially having in mind it´s a low end case so it´s mostly made out of scrap metal as they tend to do, I went through 2 heavy duty dremel discs in order to complete all the cutting. Once done I plied them backwards for two reasons, first, be it bullets, blunt tools or other, the impact would always be towards the case so it makes sense it´s pushed inwards, the second reason being to prevent sharp edges on the outside.

    Here we go:

    And that about does it, I though of adding more as certain parts of the case looked to "clean" if you know what I mean, but I can always add imperfections and artificial damages when doing the paintjob and it´s effects. I think my fav one is the chunk missing from the side that lets you look right in to the cpu heatsink.

    Tomorrow I will add similar effects on a small scale to the front of the case obviously very carefully, don´t want to brake any of the hooks that attach it to the rest of the case.

    But for today that´s it. Thank you for reading!

  5. #5

    Project: Mod in a Week // Fallout Cause SP (True

    i love this case btw. It's the look I was going for when I started my current scratch build.

  6. #6

    Project: Mod in a Week // Fallout Cause SP (True

    If you mean the stock case, theya re quite cheap to get : ) if you mean what I´ve done with it, thanks! what is your build, is on the site? curious to have a look : )

  7. #7

    Project: Mod in a Week // Fallout Cause SP (True

    lol, i meant both. I like the look of the stock case and I'm a fan of smaller cases... granted, why go stock? AND I love the direction you're going. I REALLY like the look of the CPU heat sink on the edge of the case. I look forward to the progress.

    I'm doing the Battle Dragon Bag Case:

  8. #8

    Project: Mod in a Week // Fallout Cause SP (True

    Thanks : ) just keep checking every day till saturday ; )

    I´m not sure if you can get the case outside of Spain, but if you can I´d totally recommend it for smaller power pcs as it comes with a custom size 300w psu but the whole thing doesn´t go over 40€

    I´ll go read through your build ; )

  9. #9

    Project: Mod in a Week // Fallout Cause SP (True

    3rd Day - Monday 28-11-11 - Update 1

    Last night while I was in bed I started thinking about the things I should o today and if I should paint the philips ambx that arrived yesterday evening for the AIO AL project or leave that till I finished this one this saturday. While having the AIO AL project in my mind I though, hmm I wander if I could add a screen to this project, I know I cant integrate it on the side because there´s no extra sheet of metal, pretty much the side is what the mobo is attached too. I know I can´t use fiberglass to attach it to it because while it would look decent, it wouldn´t have air breathing, and it would just overheat, not to mention adding heat to the sheet and therefore to the mobo and cpu, so that was a no go, figured I´d scrap that idea and I went to sleep. This morning however while I was looking at the screen and the case it bothered me because I really liked the concept of adding a screen but couldn´t find a way to do it, but I had some spare time so I figured I´d take the screen apart and see if an idea popped in to my head, as I removed the bezel and platform I clicked, mounts! it´s so obvious, why on earth didn´t I think of that before!

    So I took some measurements, did some screen hw mounting within the tower checked cable lenghts, everything checks out. So started to process.

    First thing, a straight cut wide enough to pass cables through and use them as a grip for the mounting:

    Now it was time to make the hole big enough for the bolt to go through, so figured I´d use the dremel to make a small starting hole, took forever to go through that, I hadn´t realised just how thick that sheet of metal was. Once done I took a drill, with the right drillbit on started, took me about 40 minutes to do both holes, mainly because I didn´t want to press to hard so not to go spoil the drillbit, eventually got there and installed the first mount:

    added some washers and tightened it up:

    Now the second one and a test mount:

    Feels quite solid, I think I will add some feet on the opposite side so no stress is on the screwed in side, so I will look for some later on.

    Now for a proper test mount of the screen´s psu and chipset:

    And it fits perfectly:

    That´s it for now, I will post a second update later today.

    Thanks for reading!

  10. #10

    Project: Mod in a Week // Fallout Cause SP (True

    nice frame! ¡más cuadros!

Page 1 of 4 123 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. I dunno if its true
    By Raven596 in forum Modding Questions
    Replies: 4
    Last Post: 04-20-2015, 02:50 AM
  2. Project: Mod in a Week // Giving new life to an old mod
    By Luciel in forum Case Mod Gallery
    Replies: 1
    Last Post: 12-27-2011, 04:44 PM
  3. Replies: 4
    Last Post: 06-28-2011, 02:56 AM
  4. Project: Fallout 3 - BottleCap Mine PC
    By TheGreatSatan in forum Modding Work logs
    Replies: 13
    Last Post: 11-16-2010, 08:33 PM
  5. Tritton AX51 True 5.1 Surround Sound Gaming Headset (TRIAI-7
    By Tazz in forum Modders-Inc Hardware Reviews
    Replies: 0
    Last Post: 01-09-2009, 07:59 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts