Results 1 to 6 of 6

Thread: inFusion by Smasher [Scratch Build] [Finished]

  1. #1

    inFusion by Smasher [Scratch Build] [Finished]


    The project infusion is a Scratch Build case that will be builded from the beginning with different types of materials: Acrylic, Metal and Wood.
    Have a unique shape and design, containing in it a powerful hardware.
    Have a watercooling (Corsair H50) modified for this project.
    The aesthetic is warm hug, with around 183 hours dedicated solely and exclusively to this design.
    These will be the base material will be used:
    Samples of acrylic, acrylic tubes, and sheets of old cases.

    With this cover of old cabinet, the main structure will be built.

    Based on a test piece made of cardboard, the cuts are marked.


    Filing the edges and sand the paint to make the raw metal.

    With this piece semi finished, we will build the front, which will house the hard disk and DVD lectograbadora.

    While I Twitcam

    With the heat gun to bend the acrylic we have left to 90 °.

    Now the sides of this piece, also bent with the heat gun.

    ums/l561/Smashermod/Smasher%20-%20inFusion/inFusionSmasher021.jpg" alt="" />

    Las piezas se pegan con cloroformo industrial, diluido con acrilico para darle una consistencia espesa y que no se evapore tan rapido.

    The rough edges that will be sanded.

    The rough edges that will be sanded.

    Más de la estructura principal.

    I had the problem that the acrylic is encompassed by a lot of heat, so should replace this piece.

    Now yes!

    The "cap" where under DVD.

    Adding an acrylic to add rigidity.

    Through which pass the wires from the HDD and DVD.


    From one side of cabinet manufacture it a holder for the source:

    lbums/l561/Smashermod/Smasher%20-%20inFusion/inFusionSmasher045.jpg" alt="" />

    Screws and mother presented.


  2. #2

    inFusion by Smasher [Scratch Build] [Finished]

    Looking great! Part of the fun of modding is taking things that you might have laying around and making them into some cool sh!#. :-)

  3. #3

    inFusion by Smasher [Scratch Build] [Finished]

    Well after a while I return with much progress.
    I was at an event, in Loki Custom Tech stand, exposing White Timantti, photos of the event here:


    In this joined Kingston as Sponsor, providing a HyperX 2x4GB DDR3

    and 110gb.

    We continue to progress, stand to tighten and not have to go with glue:

    And set the psu support:

    Support for the base:

    Cut cut cut


    "Knockouts" where they will spend the sata and power

    Ventilation to go with metal mesh

    Now we start with the "box" of the motherboard

    m/albums/l561/Smashermod/Smasher%20-%20inFusion/inFusionSmasher076.jpg" alt="" />

    This is a side project, will modding on these pc's, can follow the project on


    Small window on a single pass of the power cables

    Old cabinet veneer, thick as a good basis for


    Support for HDD's

    Re-do media

    i/o Panel


    Support structure

    albums/l561/Smashermod/Smasher%20-%20inFusion/inFusionSmasher104.jpg" alt="" />

    Good and so is at the moment, I hope your opinions!

  4. #4

    inFusion by Smasher [Scratch Build] [Finished]

    Well I have a few developments
    I worked all part of the radiator

    And went back to do the HDD bracket because on the other, the bottom had no room for the cables:

    And I started a small reservoir for H50, lack seal:


  5. #5

    inFusion by Smasher [Scratch Build] [Finished]

    After a while of modding, progress:

    Modification "box" of the PSU:

    And finally paint!

    Ready to paint

    Was something like:

    VGA Cover


    Painting on the VGA:

    PSU Sleeving:

    This source is unique in this topic:

    Which would not let me do sleeving 1x1, cut extensions.

    Santi approves the project!

    onSmasher147.jpg" alt="" />

    Scratch Build finished paint job

    As we continue with the cables:

    Starts assembly!

    And the mini reservoir of H50:

    In a little while final photos!

  6. #6

    inFusion by Smasher [Scratch Build] [Finished]

    Finished Project.


    Intel(R) Celeron(R) CPU G530 @ 2.40GHz, 2394 MHz
    ATI Radeon HD 4870 1024MB GDDR5
    Kingston 2x4GB DDR3 1600
    PowerCooler 850w 24+4 Pins Home Made Sleeving
    SSD Kinston Hyper 110gb Sata3
    WD Caviar Blue 320gb
    WD Scorpion 320gb


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. DotaBox Scratch build pc case
    By -=SpH!Nx=- in forum Modding Work logs
    Replies: 1
    Last Post: 11-06-2014, 11:37 AM
  2. [Scratch Build] Interior Des(k)ign
    By Wejjy in forum Modding Work logs
    Replies: 24
    Last Post: 06-02-2012, 01:56 PM
  3. The Claw scratch case build
    By sk8rseth in forum Modding Work logs
    Replies: 9
    Last Post: 07-29-2011, 08:49 PM
  4. Aero Case Mod/Scratch Build
    By YoungBlood in forum Case Mod Gallery
    Replies: 3
    Last Post: 06-11-2011, 05:46 AM
  5. The XICLE (EvO+) Build from Scratch
    By masbuskado in forum Modding Work logs
    Replies: 29
    Last Post: 01-31-2009, 11:15 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts