Results 1 to 3 of 3

Thread: The Psychedelic Machine!

  1. #1

    The Psychedelic Machine!

    The Psychedelic Machine!

    This Build came about cause of my old Asus Crosshair IV Formula board dying on me *RIP*
    So the Idea for this build started out as Black and Green, But thought how many people have done just 2 colors. I wanted something a little different so I decided to go with black, red, green as the main colors along with an NZXT Hue RGB Lighting for more colors as it has a mode that cycles through multiple colors.

    Specs -
    Case - Switch 810
    Motherboard - EVGA Z68 FTW
    CPU - i7-2700k
    Ram - 16gb Gskill Ripjaws X series 1600Mhz
    Video - Sapphire 7950 (Sponsored by - )
    PSU - CM Silent Hybrid Pro 1050W PSU
    SSD's - 2 40gb Intel SSD's Raid 0 (Boot Drive), 1 Corsair Force 3 240gb SSD (Games)

    Water Cooling Gear -
    2 Black Ice GT Stealth Radaitors, 1 360mm 1 240mm
    CPU Block - EK Supreme LTX Nickel
    Motherboard Block - Heatkiller EVGA Z68 FTW
    GPU Block - EK FC7950 Copper Plexi
    Res - Bitspower 150 Multi Z
    Tubing - Primochill Advanced LRT Atomic UV Green Limited Ed 1/2 - 3/4
    Fittings - Bitspower
    Coolant - Mayhems X1-UV Emerald Green

    Extra Stuff -
    Bitspower X Station II
    Bitspower LED Station
    2 5mm LED's for Pump Top (Green)
    2 3mm LED's for CPU Block (Green)
    XSPC Temp Displays (Green)
    EVGA Control Panel (Shows temps and voltage of the board)
    NZXT Hue RGB Lighting Kit
    Phobya fan controller (6 Channels 30W Per Channel)

    Sponsors - I wanna give a HUGE Thanks to Cuttingedgegamer for sending me the Sapphire 7950 3gb. Please show them your love and check out there website at

    Album Link -
    Website -
    Youtube Channel -

    - - - Updated - - -

    Build Log pictures!! I didn't want to post all of them cause there is a lot! So if you want to see the others check out the album! Thanks for looking

    These are the XSPC Displays I got. I went ahead and wired the power together just to cut down on the clutter

    These LED's I got from Ebay were originally for a car.. But i went ahead and wired a molex plug to them and was good to go!

    This is the Front panel to the Switch, went ahead and cut out the solid section and installed this oh so nice looking mesh

    Here is the top panel to the switch, again went ahead and cut out all the vents and installed a mesh panel.

    This is the first mock up I did with the Rads and Board installed, Looking pretty good I think.

    Finally!! Almost done - Here is the mock up for the PSU Cover / Bay cover I made and yes it is wood... Its cheap, easy to work with, and still looks good!

    Wooo! Final mock up! Got the PSU and Bay cover painted Got the res placed, and pump. Also cut out a section of the PSU cover for the PSU Controller and a switch for the LED's.

    The End result!!! Hope you guys enjoyed

  2. #2
    Very nice mod

  3. #3
    Quote Originally Posted by tomruijgrok View Post
    Very nice mod

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts