Results 1 to 6 of 6

Thread: Minecraft Creeper MbK

  1. #1

    Minecraft Creeper MbK

    New scratch build coming Having played two years on the Cars computer my son has a new addiction ... Just like his old man, building things.
    Not PCs(not yet) but Minecraft.

    So what could be more fun than a Minecraft Creeper build?

    He has now been two years older than his first air-cooled PC and is now it's time for a watercooled rig for his Minecraft.

    First I want to thank wwwicked for the beautiful banner ... Top Mark!! Thanks

    As mentioned: The Creeper

    And so I did ... first went to the local hardware store and buyed several aluminum strips.
    Bought Flat strips, angles and other junk. Very nice to work like old times just the same as with Meccano.

    At first I only had a picture of the Creeper. But it's better to have a real plastic Creeper. So I bought one and applied a scale of about 1:5.

    First builded the mid section around the PSU.

    Put the head together.

    And Started with the legs.

    When the real plastic Creeper came in and saw that the center piece did not match the scale I shortened it a bit. And then put the legs together.

    I still had an old acrylic mobo tray which nicely fits in the head of the Creeper. And put an Asus Maximus V Gene on it.

    Beneath the mobo tray I placed a 360 rad with some beautiful green Nanoxia fans.

    Now that the frame is ready, time the next step. The cover up, For this I will use acrylic with green vinyl.

    After some thinking and some tips I found 2 HDD coolers that I had lying around, which will nice when liquid passes through. So after some cutting and pasting:

    First leg finished. Time for the 2e

    3rd leg and midplate done. Now mount every thing very good to reduce the cracks to a minimum

    More soon

  2. #2


    There he is again, the Creeper....

    After the last update I was messing around with acrylic covers and was not happy about this.
    Nevertheless The front of the head was not bad.

    And the sides of the head where also not bad,

    But I just was not happy with the gaps between the acrylic covers. Therefore disassembled everything again

    And made everything with 6mm mdf

    Made everything smooth and sanded it.

    And let the wife paint

    When she was doing her thing, I had exchanged the previous mobo (ASUS Gene) and placed a Gigabyte Z68 (ATX) What suits better because of the format. And stick some nice old school and new EKWB blocks on it.

    And after some brainstorming.... yet again the horizontal way.

    To accomplish this, I created an extra acrylic cover.

    All horizontal again

    And connected everything in the front again.

    More coming soon

  3. #3


    For the midplate where the reservoirs and pump will be placed, I have cut out 2 pieces of acrylic

    And give it a color

    Connected the reservoir (input) on the radiator (output)

    Other res connected the input like the previous res

    Connected the outputs onto the input pomp (MCP355).

    and connected everything.

    Time to fill the Creeper. Made a nice movie about this:

    Once filled... it was time for shooting some nice pictures.

    And stacked everything together.

    Temporarily placed the head on.

    And continuing with the head covers

    More soon!!!

  4. #4


    Sunday already???...Time for an update!!!

    First the PSU ... sleeved it Black, gray, lighter gray and green this time

    Thanks to my wife (I hate paintjobs) The green side covers. (Still need to paint the bolts green)
    Will use bolts for the side and back covers because I want these to be removable

    Back also finished with the beautiful EOL Nanoxia DX12 fans

    It's always about the details, so placed onto some strategic spots LED strips and CCFL lights.

    Placed a CCFL light beneath the acrylic piece where the tubes passes through

    And on the other side I have a white LED strip to highlight some of the hardware

    It also needs a PSU So time for placing the Cooler Master PSU.

    Looks a bit strange

    Time to connect the sleeved cables

    Last but not least placed some more green LEDs beneath the Creeper

    More coming next week

  5. #5

    Final Update!!!

    Today is the big day... Time to give the Creeper away

    First installing and testing everything

    Went perfect, So placed the covers

    Looks pretty cool in the dark

    Priceless to see a child very happy

    Now let me play!!!

    That's it folks... hope you like it!!!

  6. #6

    This is absolutely awesome! Everything is very detailed, good looking, so much hard work and so much time in it...
    And so much pictures of it, a really inspiration for everyone.

    Thank you for this foto gallery!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts