Results 1 to 7 of 7

Thread: [Battle-Box ROG]

  1. #1
    babouk100's Avatar
    Join Date
    May 2014
    Location
    Sainte-Marie (Reunion Island)
    Posts
    46

    Cool [Battle-Box ROG] FINISHED

    Hello everyone. A new topic for a new project.
    This time I'm going to work on an order. The work must be flawless.
    Let's start with the presentation of the configuration I will torture.









    Case: Corsair Carbide 540 Air
    MB: Asus Rog Z97 Formula VII
    CPU: Intel i7-4790k
    RAM: 4x4Go Corsair Dominator GT 2133MHz
    GC: SLI Asus ROG GeForce GTX980 Matrix Platinum
    PSU: Corsair HX850






    Dual loop CM/CPU + CG
    * WB CPU: EK Supremacy Acetal-Nickel
    * WB GPU: Bitspower Matrix VG-NGTX980AM Acrylic
    * Pumps: 2x XSPC D5 Vario
    * Rads: EK Coolstream PE360 + EK Coolstream XTX240 + XSPC EX140
    * Rés: 2x EK-RES X3 110
    * Liquid: Mayhems Pastel White
    * Fittings: EK HDC 10/12mm
    * Tubing: Acrylic rigid 10/12mm


    Some pics:




























    Work has already started.....



    Last edited by babouk100; 05-04-2015 at 11:27 PM.
    More than a PC, a Passion

  2. #2
    babouk100's Avatar
    Join Date
    May 2014
    Location
    Sainte-Marie (Reunion Island)
    Posts
    46
    We continue with the small DIY.
    A bit of cutting, drilling, grind, painting, testing ...

    To begin, a picture of one of the two pumps




    Now DIY. To remain in the dominant white theme, and to cover the black background of the case, I made a white background which will be under the motherboard









    Then some paint work that are ready








    A small preview of rads in place into the case




    to be continued...
    More than a PC, a Passion

  3. #3
    babouk100's Avatar
    Join Date
    May 2014
    Location
    Sainte-Marie (Reunion Island)
    Posts
    46
    A few more pictures, with some positioning tests to better estimate the additional changes to make more and make sure that everything "will fit" well.


    Placing pumps, the orientation of the tops will be adjusted for connection to tubes.









    On the opposite side, some positioning tests.
    A support for the bottom reservoir will be done tomorrow.

    More than a PC, a Passion

  4. #4
    babouk100's Avatar
    Join Date
    May 2014
    Location
    Sainte-Marie (Reunion Island)
    Posts
    46
    After a delay due to a shortage of parts, I'll be able to make the rigid tubing.
    Meanwhile, I continued to work on the case.
    To start, I made a support for the bottom reservoir










    Then I made a small change in the positioning of the pumps.
    With the pumps in the bottom, and power into place, I had no where to pass the tubes.
    So I moved the pumps up.

    To keep them aligned and stabilized, so I made a "coupling" between the two pumps holders.

















    next step, rigid tubing....
    More than a PC, a Passion

  5. #5
    babouk100's Avatar
    Join Date
    May 2014
    Location
    Sainte-Marie (Reunion Island)
    Posts
    46
    While doing the rigid tubing, some pics of the motherboard...







    More than a PC, a Passion

  6. #6
    babouk100's Avatar
    Join Date
    May 2014
    Location
    Sainte-Marie (Reunion Island)
    Posts
    46
    Well, this time, it's over. Here are the pictures of the rest of the work and the final pics.
    The setting up of rigid tubing was not easy because in this case, it must pass from one side to the other, while respecting the curves to join the different elements.




































    Final pics





















    More than a PC, a Passion

  7. #7
    Thank you for a large number of detailed pictures! Very exciting!
    cvs hr
    Last edited by artmuz83; 02-09-2017 at 04:33 AM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Battle Dragon Bag - Update #26 - 8/26/2012
    By Gentleman_Dingo in forum Modding Work logs
    Replies: 86
    Last Post: 09-11-2012, 04:16 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •