Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: [worklog] RedAxe by Proka

  1. #1
    Proka's Avatar
    Join Date
    May 2015
    Location
    Belgrade
    Posts
    26

    Lightbulb [worklog] RedAxe by Proka

    SPONSORED BY








    First of all, let me* let me introduce myself, my name is Aleksandar Prokic and im from Serbia/Belgrade, and as most of you here on forum i am the typical PC* enthusiast dude,* engough about me, let`s get to the point.

    Here we are, after a long time I decided to finally start with my mod.
    The basic idea has not changed much since my original plan but the concept was jumping back and forth,
    from idea of a hanging shelves to old fashioned radio etc.*
    Of course, money has always played a major role in my decision, so i thought that must be something that is in my sphere of possibilities.*
    Unfortunately I can't show you the drawing because my lack of experience in programs suitable for that purposes, I tried but was not happy with quality of project.*
    Anyway, my main plan is to pack everything together in cooler master test bench combined with a plexiglass, while the radiator, reservoir and pump will be nailed on the wall.*
    The idea is still in my head and I'm sure it will be clearer to you as soon as it progressed.*

    For now I'm using the following with possible changes :

    MB : Asus Rampage IV Extreme 2011
    CPU : Intel I7 3820
    GPU : GTX 970 (Water Cooled with Alphacool NexXxoS GPX M01 SPONSORED BY ALPHACOOL)
    Cooler : Phobya 360lt (Тhanks to my good friend Micri)
    RAM : HyperX Savage SPONSORED BY HyperX (Water cooled with Phobya Phobya RAM-Cooler U-Cool SPONSORED BY AQUATUNING)
    SSD : HyperX Savage SPONSORED BY HyperX
    PSU : Coolermaster M2 Silent 850
    Case: Coolermaster Test bench V1
    Light : NXZT Red sleeved led

    I would like now on bare beginning to mention that this is going to be slow progress mode because the time and money will make conditions to me and my project.*
    The deadline I've set to myself is first part of August.*

    Now, I'd like to show you the direction.*
    Red color will be dominated with* the symbol of axe (of course)
    The plan is to close front part of bench with matte black plexi glass as in the middle part of bench (plexiglass) will stand red hatchet which will be with red LED.*
    I've ordered* dark red paracord for sleeving power and it will be here in a few days, and plan is to do a sleeve for this semi modular Coolermaster Silent M2 850th



    And for the last, let me show you some pictures :

    Coolermaster Test Bench V1 before sandblsting and colour coating :*








    And some photos after SB and Color coating :*











    For the end of this post, few photos of Motherboard :

    Asus Rampage IV Extreme 2011*










    Big regards from Serbia and see you soon with some updates,*
    Aleksandar.
    Last edited by Proka; 06-10-2015 at 02:21 PM.
    All the deaths are the same, only lives are different (Mao Zedong )
    http://www.pcaxe.com/

  2. #2
    Proka's Avatar
    Join Date
    May 2015
    Location
    Belgrade
    Posts
    26
    I am happy to announce that I have a new sponsor, the good people of more than well-known companies Aquatuning and Phobya offered a sponsorship in the form of :
    8х Phobya RAM Cooler Extreme Performance Set,
    2х Phobya red LED thermometer,
    1x Phobya sleeving kit.
    Not to praise them, but I think so far I have not had better communication with such great company!


    Getting back on topic,
    tomorrow I expect the package with Phobya 360lt, when it arrives will be able to continue with the drilling of the wall and mounting.
    Saturday is scheduled CNC machines for cutting Plexiglas.
    expect some images later on Friday, maybe perhaps earlier.



    Thanks for your time, and regards,

    Aleksandar
    Last edited by Proka; 05-11-2015 at 07:14 AM. Reason: Bolding.
    All the deaths are the same, only lives are different (Mao Zedong )
    http://www.pcaxe.com/

  3. #3
    Proka's Avatar
    Join Date
    May 2015
    Location
    Belgrade
    Posts
    26
    Two of the three packages just arrived today , unfortunately the most important one comes in one or two days.

    These two packages are:

    paracord (Bloodred) for PSU sleev

    1x Mayhems Uv Red, ofc for my watercooling loop.

    Here are a couple of pictures till i get 360lt in my hands and start driling.


    paracord





    Last edited by Proka; 06-10-2015 at 02:32 PM.
    All the deaths are the same, only lives are different (Mao Zedong )
    http://www.pcaxe.com/

  4. #4
    Proka's Avatar
    Join Date
    May 2015
    Location
    Belgrade
    Posts
    26
    Wall hanging done! Photos are here!
    My wall now have four more holes with screws for reservoir and radiator. I'm still waiting water blocks for RAM and GPU in order to install tubes.
    For now I'm satisfied how everything turned out as well with my cleaning skills after dirty work was done
    I also put some rubber piece under the radiator to avoid wall damage, with possibility for interspace adjustment.
    Next week is reserved for cutting and engraving plexiglass.

    Marking









    Mounting








    And support from my cat
    Last edited by Proka; 06-10-2015 at 02:43 PM.
    All the deaths are the same, only lives are different (Mao Zedong )
    http://www.pcaxe.com/

  5. #5
    Proka's Avatar
    Join Date
    May 2015
    Location
    Belgrade
    Posts
    26
    Sleeving started!

    I'll let the pictures speak


    pump mounted





    Sleeving tools :





    Phobya fans before sleeving :






    Fans afther sleev :









    Big regards,
    Aleksandar
    Last edited by Proka; 06-10-2015 at 02:51 PM.
    All the deaths are the same, only lives are different (Mao Zedong )
    http://www.pcaxe.com/

  6. #6
    Proka's Avatar
    Join Date
    May 2015
    Location
    Belgrade
    Posts
    26
    Last night I got fans, today I did a pump , as you can see I did not like the color of connectors , so I decided to replace all of them.
    Today I ordered 3 more so that I could replace those on ventilators.













    Last edited by Proka; 06-10-2015 at 02:58 PM.
    All the deaths are the same, only lives are different (Mao Zedong )
    http://www.pcaxe.com/

  7. #7
    Proka's Avatar
    Join Date
    May 2015
    Location
    Belgrade
    Posts
    26
    And my first 24pin Sleeve is finished.
    At the beginning I was a bit problematic , but later when I went settled down very easily.
    This weekend I plan to go on and finish the sleeving . Here are a few photos .

    Тооls :




    And the 24pin for now :









    And fullshot Photo :



    Last edited by Proka; 06-10-2015 at 03:02 PM.
    All the deaths are the same, only lives are different (Mao Zedong )
    http://www.pcaxe.com/

  8. #8
    Proka's Avatar
    Join Date
    May 2015
    Location
    Belgrade
    Posts
    26
    The postman came today , and brought something nice of course it`s my GTX 970!
    Now i am chaising the gpu block, and waiting for the rest of the components.

    Few photos :





    Last edited by Proka; 06-10-2015 at 03:06 PM.
    All the deaths are the same, only lives are different (Mao Zedong )
    http://www.pcaxe.com/

  9. #9
    Proka's Avatar
    Join Date
    May 2015
    Location
    Belgrade
    Posts
    26
    Today is the day I got my first sponsorship package! Overwhelmed with happiness!! Thank you very much Aquatuning i Phobya!!!

    Package contains the following:
    6х Phobya RAM-Cooler U-Cool - Black 6x
    4x phobya molex extractor kit (we agreed for one )
    2x digital thermometer – red
    1х Masterkleer tubing PVC 11/8mm
    1х bag of gummy bears candies

    Here are photos, in the next few days is expected the rest of project parts, and then we can continue with playing )))





















    Last edited by Proka; 06-10-2015 at 03:12 PM.
    All the deaths are the same, only lives are different (Mao Zedong )
    http://www.pcaxe.com/

  10. #10
    Proka's Avatar
    Join Date
    May 2015
    Location
    Belgrade
    Posts
    26
    Here's another good news, today I received confirmation that I got another sponsor, it is Alphacool, that gives me a sponsorship in the form of a water block for gtx970!
    All the deaths are the same, only lives are different (Mao Zedong )
    http://www.pcaxe.com/

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. [Worklog] Soberheid
    By Smasher in forum Modding Work logs
    Replies: 10
    Last Post: 07-23-2011, 11:11 PM
  2. My First Mod and Worklog
    By jteague1 in forum Modding Work logs
    Replies: 3
    Last Post: 06-02-2010, 06:12 AM
  3. Deathcore mod worklog
    By ShamanS in forum Modding Work logs
    Replies: 15
    Last Post: 01-04-2010, 09:15 AM
  4. WorkLog: ATTN2Detail
    By Zitt in forum Modding Work logs
    Replies: 21
    Last Post: 08-17-2008, 08:01 PM
  5. the mystic worklog
    By Braveheart in forum Modding Work logs
    Replies: 11
    Last Post: 03-26-2008, 04:31 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •