If you can remember, my previous mod was based on Assassin's Creed Game. So this time around I thought of going a bit to the future with a mod based on Crysis Game.
This will have lot of work to do and will need lot of hours. So I expect this work-log to go on for few months.
First I must give a huge thanks to Thermaltake for encouraging me to do this mod.
This build would not become a reality if not for my Sponsors. So a big thank goes out to my sponsors.
Avexir is supporting this build with Blue Raiden DDR4 Memory sticks
Gigabyte is supporting this build with a X99 Gaming G1 WIFI Motherboard
Nvidia is supporting this build with 2x GTX 980 Graphic Cards
Thermaltake is supporting this build with all the items listed below.
1x Thermaltake Urban T81
2x Thermaltake Pacific PT40-D5 Silent Kit Reservoir/Pump Combo
2x Thermaltake Pacific RL360 Radiator
1x Thermaltake W2 CPU Water Block
2x Thermaltake V-Tubler PETG Tube 5/8” (16mm) OD 500mm 4 Pack
8x Thermaltake Riing 12 LED Blue
1x Toughpower Grand 1200W
and dozens of Fittings needed for the loop.
I will be modifying the Thermaltake Urban T81 from ground up to facilitate a new component layout using materials like Acrylic, Aluminium and Steel. All the side, top and front panels will be made with acrylic sheets to carry the Crysis Game Theme. After assembling the whole case it will be airbrushed to give it the effects that are demonstrated in the pictures.
This mod will have a motherboard cover which will be controlled by a Raspberry Pie Micro-Controller using a 7" touch screen. Raspberry Pie will also control fan speeds, LED colors and other actuators for moving parts.
Main focus point of this mod was the holding facility where Crysis 3 game begins. So the airbrushing will try to demonstrate the looks of a old futuristic building.
These are the 3D rendering of the mod. It should resemble these once completed.