Hi guys,

So this is my first build and this forum contains some good stuff so I decided to join! (ps: from belgium so I hope my English is fine enough )

I will be posting all my work on the forum aswell!
(Added links so you can quickly see the hardware)

I have 3 questions (Sorry they got quite long):
1) Will my complete build fit + is it all compatible?
2) Is my water loop alright from a efficiency point fo view (is my intake and exhaust good, is the loop in the right order, were do I place the drain valve in my loop (RES2 right?) and will it look decent if I place it like this?
3) Are there any generel remarks or things I have to look out for (Should I buy shrouds? how many Stop Fittings will I need?)

I would be gratefull for answers to any of the questions

I will now post all the details from what I decided on (up to now)

First, my core build
Motherboard : ASUS Z170-A
CPU : INTEL Core i5 6600K 3.5-3.9GHZ 6MB 4 Core 4 Threads
Power Supply : Corsair RM750x
Memory : Kingston HyperX Fury Black 16GB DDR4-2666 Kit HX426C15FBK2/16
SSD M.2 slot : Samsung 950 Pro 256GB M.2
CASE : Phanteks Enthoo Pro M Acrylic Window Edition Antraciet

Now my water cooling stuff:
CPU Block : Koolance CPU-390I Water Block, Acrylic Top - Intel Processor
GPU Block : Included with my GPU
Reservoir 1 : Bitspower Water Tank Z-Multi 250
Reservoir 2 : Bitspower Water Tank Z-Multi 100 (just for looks)
2x Dual Radiators : EK-CoolStream PE 240 (Dual)
Pump : Swiftech MCP50X Extreme pressure Pump

PETG Tube : Bitspower None Chamfer PETG Link Tube OD12MM-Length 1000MM
Fitting : EK-HDC Fitting 12mm G1/4 - Nickel
Angled Adapter : EK-AF Angled 90° G1/4 Nickel and/or EK-CSQ Adapter 45° G1/4 Nickel
Water : Mayhems X1 Blood Red Coolant 1Ltr

I alreay have 2 x 140mm fans with the case and Already bought 4 x Corsair AF120 led 120mm fans for the radiators

That was the hardware, I'm also sleeving but I'll leave that out, this is allot already

My loop

And here I tried to make a sketch on how I would make my loop in semi 3D (2 pics)

Note: My reservoirs have different sizes then the those in this picture

Is this achievable with no bending skills? Any other remarks on this?

Please be as hard on me as you can, I wanne do this right!

Thanks anyhow for all the assist!