Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: ❚❚ [Verticality by Duality92] ❚❚

  1. #1
    Staff on OCN :) Duality92's Avatar
    Join Date
    Jul 2016
    Location
    Quebec, Canada
    Posts
    32

    Lightbulb ❚❚ [Verticality by Duality92] ❚❚



    ver′tical′ity
    [vur-ti-kuh l]
    adjective
    1.
    being in a position or direction perpendicular to the plane of the horizon; upright; plumb.
    2.
    of, relating to, or situated at the vertex.
    3.
    of or relating to the cranial vertex.
    4.
    Botany.
    (of a leaf) having the blade in a perpendicular plane, so that neither of the surfaces can be called upper or lower.
    being in the same direction as the axis; lengthwise.
    5.
    of, constituting, or resulting in vertical combination.
    6.
    of or relating to a product or service from initial planning to sale.
    7.
    of, relating to, or noting a stratified society, nation, etc.
    noun
    8.
    something vertical, as a line or plane.
    9.
    a vertical or upright position.
    10.
    a vertical structural member in a truss."



    Parts List
    Hardware
    AMD A10-7890K
    Gigabyte GA-F2A88XN-WIFI
    G.Skill Trident X 2*8GB 2400/10
    G.Skill SSD
    HDPlex 160W DC-ATX
    HDPlex 160W AC-DC w/PFC

    Cooling
    1 * Alphacool XT45 280
    2 * Be Quiet! Silent Wings 3 PWM 140mm fans
    1 * Alphacool DC-LT 2400 Ceramic Pump
    1 * Alphacool DC-LT Pump Top | Plexi
    4 * Alphacool Eiszapfen G1/4" 45 Angled Rotatable Adapter Fitting - Black
    4 * Alphacool Eiszapfen G1/4" 90 Rotary L-Connector - Black
    2 * Alphacool G1/4 16mm Knurled HardTube Compression Fitting - Black
    1 * Alphacool G1/4 Bulkhead Connector - Black
    1 * Alphacool G1/4 Round TEE Connection Terminal - Black
    1 * Alphacool HardTube 16/13mm Plexi Clear 40cm
    1 * Alphacool NexXxoS XP Light - Acetal - Intel/AMD
    8 * 8mm / 11mm Compression Fittings

    Modding
    75 * Darkside 2mm (5/64") High Density Cable Sleeving - Graphite (DS-HD2-GMC)
    25 * Darkside 2mm (5/64") High Density Cable Sleeving - Opaque Red (DS-0731)
    2 * Darkside 7.75" (20cm) Dimmable Rigid RGB LED Strip (DS-0533)
    1 * Darkside Custom Configurable Colour, Dual RGB LED Controller with Remote (DS-0535)
    4 * MMM 18 AWG Ul1007 Hookup Wire 25' - Black (MOD-0147)
    1 * MMM 24-Pin ATX Female Connector - Black (MOD-0096)
    1 * MMM 24-Pin ATX Male Connector - Black (MOD-0095)
    1 * MMM 4-Pin EPS Female Connector - Black (MOD-0105)
    1 * MMM 4-Pin EPS Male Connector - Black (MOD-0104)
    1 * MMM 5-Pin SATA Female Connector - Black (MOD-0106)
    20 * MMM ATX Female Pin - 5 Pack (MOD-0116)
    2 * MMM SATA Pin - 5 Pack (MOD-0117)
    5 feet ModMyMods 8mm ID x 11mm OD PVC Tubing - Clear (58000)
    1 * SIJIAWU Professional Wire Stripper and Cutter - 16 to 26 AWG (DY-011105)
    1 * UPC Custom Pin Crimper (UPC-0001)

    3D Printed Parts
    Motherboard, SSD and cable management bracket
    Pump and Power Supply mounting bracket
    Reservoir top and bottom
    Base stand
    Motherboard pin covers
    Input cable management
    Fan grills
    +++



    Progress as of 2016-11-29
    Last edited by Duality92; 11-30-2016 at 11:00 AM.

  2. #2
    Staff on OCN :) Duality92's Avatar
    Join Date
    Jul 2016
    Location
    Quebec, Canada
    Posts
    32

    So I just got confirmation from AMD that I'll be getting an A10-7890K for the final piece of hardware

  3. #3
    Administrator crowTrobot's Avatar
    Join Date
    Nov 2009
    Location
    Toronto, Ontario, Canada
    Posts
    124
    Interesting. So the body is the radiator? That's a very cool idea.

  4. #4
    Staff on OCN :) Duality92's Avatar
    Join Date
    Jul 2016
    Location
    Quebec, Canada
    Posts
    32
    Quote Originally Posted by crowTrobot View Post
    Interesting. So the body is the radiator? That's a very cool idea.

    Yup, everything will be mounted to the radiator

  5. #5
    Staff on OCN :) Duality92's Avatar
    Join Date
    Jul 2016
    Location
    Quebec, Canada
    Posts
    32
    All of it's cables are cut at 3 inches already



  6. #6
    Staff on OCN :) Duality92's Avatar
    Join Date
    Jul 2016
    Location
    Quebec, Canada
    Posts
    32



    I redesigned the motherboard tray yesterday as I found that I wouldn't be able to mount the motherboard to the radiator with the layout I had designed previously because of the motherboard mounting. (couldn't access the 140mm fan holes with the motherboard installed). Now I can install the motherboard somewhat easier AFTER fixing it to the radiator.

    Try and figure out what all the cable combs are for 32 total wires at the end.



  7. #7
    Staff on OCN :) Duality92's Avatar
    Join Date
    Jul 2016
    Location
    Quebec, Canada
    Posts
    32



    Here are pictures of my custom case for the HDPlex 160W (new revision). Since it's a PicoPSU style power supply and I didn't want to mount it to the motherboard, this is my solution






  8. #8
    Staff on OCN :) Duality92's Avatar
    Join Date
    Jul 2016
    Location
    Quebec, Canada
    Posts
    32



    Here is an update. I have completed the power supply case, the power supply bracket and the pump bracket. The main thing left to do is finalize the motherboard mount and make a few spacers for various locations to keep things even. Possibly 140mm fan grills too if I have long enough M3 screws.






  9. #9
    Staff on OCN :) Duality92's Avatar
    Join Date
    Jul 2016
    Location
    Quebec, Canada
    Posts
    32


    So the build isn't dead and I appologize for the lack of updates, I was faced with a big problem, the motherboard I had modded to remove the 24-pin and 4-pin connectors didn't survive the surgery I put it through. I had to order a new motherboard and design a custom PCB to achieve the look I was after

    Last edited by Duality92; 05-29-2017 at 09:26 AM.

  10. #10
    mr.maler's Avatar
    Join Date
    Apr 2017
    Location
    Germany
    Posts
    26
    This is a really creative concept! Looks stunning!

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •