Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Fenwar

  1. #1
    warboy's Avatar
    Join Date
    Sep 2012
    Location
    Torino
    Posts
    62

    Fenwar

    Hi! guys!
    I start work at another mod starting from the Case Bitfenix Shogun

    I want to change the design and colors of this fantastic case








    POWER SUPPLY: FSP HYDRO G 750W
    Motherboard:
    MSI Z97A GAMING 6
    Graphics Card:MSI GTX 980 GAMING 4G
    Case: BitFenix Shogun
    Ram: 16 Gb CORSAIR VENGEANCE(4x4Gb)
    Fans: 6 x Bitfenix Xtreme Spectre Pro LED blue
    LED: Alchemy 2.0 Magnetics Led Strips RGB controller 150 cm
    CPU: Intel i7 4790k
    SSD: Samsung PRO 128 GB
    HDD: 4 TB WD Green (2 x 2Tb)

    Now some hardware photos


    The power Supply is FSP HYDRO G 750W


  2. #2
    warboy's Avatar
    Join Date
    Sep 2012
    Location
    Torino
    Posts
    62







  3. #3
    warboy's Avatar
    Join Date
    Sep 2012
    Location
    Torino
    Posts
    62
    and now the fans!
    BITFENIX SPECTRE XTREME LED BLUE




  4. #4
    warboy's Avatar
    Join Date
    Sep 2012
    Location
    Torino
    Posts
    62
    The lighting of the case will be entrusted to the BitFenix Magnetic RGB LED controller may change due to their effects and lights.
    Although the c BitaseFenix Shogun already has a controller for the LEDs.



    And then some of sleeving with BitFenix Alchemy 2.0 sleeved Cable











  5. #5
    warboy's Avatar
    Join Date
    Sep 2012
    Location
    Torino
    Posts
    62
    I usually start with a mod when I start with a well-defined project and then add details and changes during construction.
    As in this case that with a simple modification to the case, I repositioned the power buttons, reset and USB ports from the front to the rear.

    Here is an overview of the case:





    These are the supports for the GPU




    Take down some of parts






  6. #6
    warboy's Avatar
    Join Date
    Sep 2012
    Location
    Torino
    Posts
    62
    Now i customize the power supply:
    un FSP Hydro G 750
    I painted some details with the airbrush with acrylic paint water-based












    [YOUTUBE]
    https://www.youtube.com/watch?v=xm5eFxAjrvc[/YOUTUBE]

  7. #7
    warboy's Avatar
    Join Date
    Sep 2012
    Location
    Torino
    Posts
    62
    After the power supply starts to place the radiator 360mm, with 3 fans Spectre Xtreme LED BLU that will be linked to the BitFenix Recon for the speed and temperature management)







    And with a bit of plexiglass cuts begin to customize the exterior of the case


  8. #8
    warboy's Avatar
    Join Date
    Sep 2012
    Location
    Torino
    Posts
    62
    After i painting the parts plexy and...

    Now start with mounting








  9. #9
    warboy's Avatar
    Join Date
    Sep 2012
    Location
    Torino
    Posts
    62
    For the liquid cooling system i use

    PUMP AND RESERVOIR: EK XRES 100 D5 vario


    WATERBLOCK: Alphacool NexXxoS XP≥ Light - Acetal Edition*


    RADIATOR: Alphacool NexXxoS ST30 Full Copper 360mm*
    Last edited by warboy; 03-18-2017 at 10:55 AM.

  10. #10
    warboy's Avatar
    Join Date
    Sep 2012
    Location
    Torino
    Posts
    62



Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •