Name:  fbb.jpg
Views: 252
Size:  21.7 KB
Hey guys whats up I'm Nick other wise known as Dirty South PC Mods. Going to be working on a build for my Gamer Girl that likes Spiders.

First off I would like to thank my Sponsors.
Attachment 739

Attachment 740

Thank you for your support

Secondly I would like to thank my two fave stores that I buy all my gear at.
Views: 197
Size:  13.6 KB
Name:  Performance_PCs-1.jpg
Views: 178
Size:  13.8 KB

Ok so lets get this build started.

Attachment 741
Ok here is our Motherboard an ASRock Z77 Extreme 4 1155.

Attachment 743
The heat sinks didn't really go with my overall theme so we are going to paint them Pink. First I taped the Contact Points of the Heatsinks.

Attachment 744
Then we shot them with Etching Primer

Attachment 745
And then with Krylon Floresent Pink.

Attachment 746
There we go much better.

Attachment 747
Used a Koolance double sided male coupler between the Phobya 400 Pump and the Primochill CTR

Attachment 748
Like so

Attachment 749
Prepping the Fans for there Pink Doom :P

Attachment 750
Since you can't use regular spray paint on Plastic We first used Krylon Fusion in white as a primer and will be shooting the Pink over that for all the Plastic parts.
Attachment 751Attachment 752Attachment 753

Attachment 754Attachment 755
The Phobya 400 Pump is going to get the same treatment.

Attachment 756
This is the case we will be using in our build. A CoolerMaster HAF 922..We are going to be cutting a full window, Trimming the 5.25" Drive cage down from 5 slots to 2, Removing the HDD cage. And paint the Motherboard Tray, whats left of the 5.25 Drive cage, I/O plate and front panel mesh Pink.

Attachment 757
Shes Naked!!!! Time to pop some Rivets

Attachment 758
Ok we removed the IO/Expansion slot plate, Motherboard Plate, HDD cage(went in the trash) and 5.25" drive cage

Attachment 759
Some White Primer on the IO/Expansion Plate

Attachment 760
First Coat of Primer on the Mobo plate

Now while we wait for the Primer to dry. We are going to get started on the cuts we need to make.

Attachment 761
Measuring up for the Side Panel Window cut.

Attachment 762
Always use an Awl or old screwdriver thats been stripped to mark your drill holes to keep your drill from walking

Attachment 763
We wanted rounded corners so we are going to use a drill for the corners

Attachment 764
Ok most use a Dremel or a Jigsaw. I prefer my 90,000 RPM air powered cut off wheel. Cuts through Aluminum and 1/4" Steel Like a Hot Knife through Butter

Attachment 765
Same tool was used to trim down the 5.25" drive bay from 5 to 2 slots

Let The Pinking Begin

Attachment 766
Attachment 767
Attachment 768

Attachment 769
Pops shooting the last of the Clear Coat

Alright the first set of Icemodz cables are here
Here is a Link to the Unboxing Video we did for them.

Attachment 770
Man thats a bright Pink.

Name:  DSCF1601.jpg
Views: 188
Size:  37.0 KB
Alright so I ordered some Pink Di-noc and some Mirrored Pink Film for the CPU Block and the Lamptron FC-2 Fan Controller we will be using

Name:  DSCF1602.jpg
Views: 174
Size:  38.7 KB
Here is the Water Block will be using for the CPU its an older OCZ Hydroflow from about 2009

Name:  DSCF1603.jpg
Views: 193
Size:  57.5 KB
Wrapped the Chrome Portion of the CPU Block in the Pink Mirrored Vinyl

Name:  DSCF1641.jpg
Views: 187
Size:  50.9 KB
Got the Case riveted back together and the ASRock Z77 Board with our OCZ Block on there not too shaby!!

Name:  DSCF1643.jpg
Views: 217
Size:  53.1 KB
Got a first Radiator Installed the XSPC 240mm Rad in the Front where the HDD cage Had formerly been.

Name:  DSCF1643.jpg
Views: 217
Size:  53.1 KB
The Primochill 120 CTR UV Pink Res and Phobya pump in there

Name:  DSCF1648.jpg
Views: 181
Size:  38.8 KB
Ok not to crazy about the Pink Mirrored Vinyl going to try the Pink Di-Noc
Name:  DSCF1649.jpg
Views: 175
Size:  38.9 KB
Name:  DSCF1650.jpg
Views: 172
Size:  40.6 KB

Name:  DSCF1652.jpg
Views: 178
Size:  46.2 KB
And now for the Lamptron FC-2
Name:  DSCF1653.jpg
Views: 178
Size:  38.5 KB
Name:  DSCF1654.jpg
Views: 179
Size:  40.6 KB
Name:  DSCF1655.jpg
Views: 172
Size:  45.0 KB
Name:  DSCF1656.jpg
Views: 177
Size:  50.6 KB
Name:  DSCF1657.jpg
Views: 175
Size:  39.4 KB
Name:  DSCF1658.jpg
Views: 185
Size:  36.8 KB

Name:  DSCF1659.jpg
Views: 171
Size:  42.2 KB
There Optical Drive is receiving the same treatment

Name:  DSCF1661.jpg
Views: 178
Size:  57.8 KB
And I don't like it at all. going to tear it off and paint them to match the rest of the front panel.

Name:  DSCF1664.jpg
Views: 179
Size:  46.0 KB
There much better

Name:  DSCF1665.jpg
Views: 187
Size:  48.7 KB
Found a cool Halloween decoration with Spiders on it and made it fit in the case. Also just got the Primochill Advanced LRT Tubing UV Pink

Name:  DSCF1666.jpg
Views: 178
Size:  29.8 KB
Wrapped the PSU in Pink Di-Noc to Match the CPU

Name:  DSCF1675.jpg
Views: 293
Size:  31.2 KB
Got the BSMODS 5050 RGB LED Strip installed. This thing is awesome I highly suggest going to the site and getting a set

Also here is a short unboxing and demo video of the Product in action

Name:  DSCF1677.jpg
Views: 172
Size:  54.9 KB
Ok we got her all tubed up going to be adding a second 240mm crossflow Rad to the top later

Name:  DSCF1680.jpg
Views: 182
Size:  49.9 KB
Ok was thinking of sleeving these Front Panel Wires But I got a better Idea.

Name:  DSCF1682.jpg
Views: 173
Size:  54.8 KB
I found some UV Pink 18g wire so I am going to change out all the FP wires to this wire
Name:  DSCF1684.jpg
Views: 180
Size:  55.8 KBName:  DSCF1685.jpg
Views: 170
Size:  60.5 KBName:  DSCF1686.jpg
Views: 181
Size:  49.0 KB

Name:  DSCF1689.jpg
Views: 173
Size:  29.4 KB
Here is a look at a crazy color change effect in the Black Light.

Name:  DSCF1723.jpg
Views: 172
Size:  62.9 KB
Got the 120Gb Kingston SSD Mounted behind the Mobo plate.

Name:  DSCF1731.jpg
Views: 176
Size:  52.5 KB
This is our Video Card EVGA GTX 550Ti. Going to be custom Painting it and the New Xigmatek PSU with a Spider Web Design

Name:  DSCF1733.jpg
Views: 193
Size:  53.2 KB
Name:  DSCF1734.jpg
Views: 181
Size:  53.1 KB
Name:  DSCF1735.jpg
Views: 174
Size:  44.2 KB
Name:  DSCF1740.jpg
Views: 178
Size:  47.2 KB
Name:  DSCF1741.jpg
Views: 167
Size:  29.2 KB
Name:  DSCF1747.jpg
Views: 171
Size:  48.9 KB

Name:  DSCF1736.jpg
Views: 183
Size:  54.9 KBName:  DSCF1737.jpg
Views: 177
Size:  33.1 KB
Xigmatek 700 watt PSU I picked up from PPC's on clearance for $25 It to will get the same Custom Web patern
Name:  DSCF1738.jpg
Views: 173
Size:  45.2 KB
Name:  DSCF1739.jpg
Views: 179
Size:  30.8 KB
Name:  DSCF1742.jpg
Views: 175
Size:  38.6 KB
Name:  DSCF1745.jpg
Views: 176
Size:  26.8 KB
Name:  DSCF1746.jpg
Views: 175
Size:  55.8 KB
Name:  DSCF1751.jpg
Views: 177
Size:  33.3 KB
Name:  DSCF1752.jpg
Views: 174
Size:  36.0 KB

Name:  DSCF1748.jpg
Views: 183
Size:  32.6 KBName:  DSCF1749.jpg
Views: 221
Size:  33.8 KB
Got the New Icemodz Custom Cables and UV LED Lights in there check out his site he does awesome work.

Also here is another video of the unboxing and Demo of the lights Outside as well as Inside the case.

Well thats it for now guys I'll install the Newly painted PSU when I get the second Rad, GPU Block and Flow Indicator in.

Feel Free to stop by the Dirty South PC Mods Facebook Group page and Terror-Byte Gaming Page

BS MODS Facebook Page

Icemodz Facebook Page

As well as our Youtube Channel for awesome Unboxings, Reviews, Game footage and more!!!!

See you soon