Results 1 to 5 of 5

Thread: Fractal Node 804 Freddy Kruger Build by Dirty South PC Mods

  1. #1

    Fractal Node 804 Freddy Kruger Build by Dirty South PC Mods

    Hey guys whats up I'm Nick Blackwell from Dirty South PC Mods. Coming at you with another awesome build based on the Nightmare on Elm Street films. Sponsored by the good folks at

    Name:  Terror-Byte Logo-banner.jpg
Views: 1466
Size:  21.2 KB
    The good lads at Terror-Byte Gaming scope out there web site here http://www.terrorbytegaming.co.uk/

    Name:  Fractal designs.jpg
Views: 1271
Size:  14.7 KB
    Check out more of Fractals Design's awesome products here http://www.fractal-design.com/

    Name:  lutro.jpg
Views: 1388
Size:  19.7 KB
    You can find all of LC's gear over at http://modbunker.com/

    Name:  logo_02.jpg
Views: 1186
Size:  8.7 KB
    Scope out the sweet line of LEPA products here http://www.lepatek.com/

    Name:  logo-primary.png
Views: 1191
Size:  8.7 KB
    Peruse the epic line of Rust-Oleum products and colors over at https://www.rustoleum.com/

    Name:  EKWB.jpg
Views: 1230
Size:  4.4 KB
    Take a look at EKWB spectacular line of Liquid Cooling Products here http://www.ekwb.com/

    Name:  3d98a172_monsoon.jpg
Views: 1191
Size:  10.0 KB
    You can find a full line of Monsoon Products here http://www.performance-pcs.com/

    Name:  Name_and_logo_150x.png
Views: 1207
Size:  10.2 KB
    Check out Mayhem's line of premium fluids and dyes in Pre-mix and concentrate here http://www.mayhems.co.uk/shop2/

    Thank you very much for your generous contribution to my project.

    and of course the good folks at.
    Name:  723f3054_performancepc-1-rgb.jpg
Views: 1195
Size:  19.4 KB
    Anything and everything you would ever need for your Liquid Cooling and PC Modification needs.


    First up lets take a look at the Fractal Designs Node 804

    Name:  Node 804 - 1.jpg
Views: 1418
Size:  41.3 KBName:  Node 804 - 2.jpg
Views: 1295
Size:  43.9 KBName:  Node 804 - 3.jpg
Views: 1329
Size:  41.2 KBName:  Node 804 - 4.jpg
Views: 1245
Size:  23.9 KBName:  Node 804 - 5.jpg
Views: 1225
Size:  19.0 KBName:  Node 804 - 6.jpg
Views: 1224
Size:  27.8 KBName:  Node 804 - 7.jpg
Views: 1498
Size:  36.5 KBName:  Node 804 - 8.jpg
Views: 1188
Size:  27.3 KBName:  Node 804 - 9.jpg
Views: 1240
Size:  23.4 KBName:  Node 804 - 10.jpg
Views: 1296
Size:  37.2 KBName:  Node 804 - 11.jpg
Views: 1245
Size:  28.4 KBName:  Node 804 - 12.jpg
Views: 1263
Size:  16.9 KBName:  Node 804 - 13.jpg
Views: 1184
Size:  14.5 KBName:  Node 804 - 14.jpg
Views: 1309
Size:  37.2 KBName:  Node 804 - 15.jpg
Views: 1243
Size:  35.2 KBName:  Node 804 - 16.jpg
Views: 1283
Size:  52.4 KBName:  Node 804 - 17.jpg
Views: 1284
Size:  26.4 KBName:  Node 804 - 18.jpg
Views: 1226
Size:  23.0 KBName:  Node 804 - 19.jpg
Views: 1223
Size:  27.6 KBName:  Node 804 - 20.jpg
Views: 1237
Size:  24.4 KB

    as you can see it is a cube style case it has a MATX form factor but still has enough room for up to 12 drives in combination of 3.5" and 2.5", and 10 fan mounts. that is more than any other MATX case on the market to date.

    Ok guys that's it for today. I'll be back later this week with an update and more awesome pics.

    Alright guys getting started on the Painting process
    Name:  IMG_3118.jpg
Views: 1191
Size:  34.1 KBName:  IMG_3119.jpg
Views: 1193
Size:  35.1 KBName:  IMG_3120.jpg
Views: 1220
Size:  32.7 KBName:  IMG_3121.jpg
Views: 1162
Size:  24.4 KB
    Name:  IMG_3112 - Copy.jpg
Views: 1187
Size:  40.9 KBName:  IMG_3122 - Copy.jpg
Views: 1195
Size:  45.7 KBName:  IMG_3123 - Copy.jpg
Views: 1178
Size:  34.3 KBName:  IMG_3124 - Copy.jpg
Views: 1189
Size:  17.0 KBName:  IMG_3125 - Copy.jpg
Views: 1187
Size:  35.9 KBName:  IMG_3126 - Copy.jpg
Views: 1216
Size:  26.0 KB

    Alrighty when I left off I had just started the painting process.

    Name:  IMG_3127.jpg
Views: 1222
Size:  33.5 KBName:  IMG_3128.jpg
Views: 1180
Size:  30.3 KBName:  IMG_3129.jpg
Views: 1166
Size:  19.9 KBName:  IMG_3131.jpg
Views: 1192
Size:  31.8 KBName:  IMG_3132.jpg
Views: 1143
Size:  30.0 KBName:  IMG_3133.jpg
Views: 1174
Size:  40.4 KBName:  IMG_3134.jpg
Views: 1194
Size:  28.3 KB

    As you can see the Brown came out really well.

    Name:  IMG_3135.jpg
Views: 1204
Size:  26.5 KBName:  IMG_3137.jpg
Views: 1187
Size:  28.5 KB
    Got the front panel painted and seeing as the build is based off of a horror flick I didn't want a smooth finish. I wanted a texture to it.

    Name:  IMG_3142.jpg
Views: 1172
Size:  32.4 KBName:  IMG_3143.jpg
Views: 1216
Size:  21.2 KBName:  IMG_3144.jpg
Views: 1206
Size:  39.9 KB

    The motherboard plate and I/O bracket have been riveted back into place. I really like the look of the Red and Brown together I might do another Brown build again later.

    Time to get started on the fans. These are LEPA 120mm Copper fans in RED.

    Name:  IMG_3139.jpg
Views: 1213
Size:  31.1 KBName:  IMG_3140.jpg
Views: 1184
Size:  26.0 KBName:  IMG_3153.jpg
Views: 1184
Size:  34.8 KBName:  IMG_3154.jpg
Views: 1204
Size:  30.3 KB
    First I removed the Blades and since the LED assembly is part of the blade I don't have to worry about taping that off...So I just taped off the center hub and the Cables.

    Name:  IMG_3145.jpg
Views: 1836
Size:  44.2 KBName:  IMG_3146.jpg
Views: 1181
Size:  48.6 KBName:  IMG_3147.jpg
Views: 1164
Size:  45.8 KBName:  IMG_3148.jpg
Views: 1191
Size:  38.4 KBName:  IMG_3149.jpg
Views: 1147
Size:  28.0 KBName:  IMG_3150.jpg
Views: 1156
Size:  42.4 KBName:  IMG_3151.jpg
Views: 1151
Size:  35.5 KBName:  IMG_3152.jpg
Views: 1192
Size:  41.7 KB
    Name:  IMG_3155.jpg
Views: 1176
Size:  51.0 KBName:  IMG_3156.jpg
Views: 1169
Size:  40.5 KBName:  IMG_3157.jpg
Views: 1185
Size:  27.1 KB

    Doing a test fit of the hardware to see what it's going to look like and start to see how much room I have to work with.

    The new EKWB Supremacy EVO from Performance PC's just showed up. http://www.performance-pcs.com/ek-su...per-plexi.html

    Name:  IMG_3158.jpg
Views: 1176
Size:  19.0 KBName:  IMG_3159.jpg
Views: 1142
Size:  20.7 KBName:  IMG_3160.jpg
Views: 1161
Size:  28.7 KBName:  IMG_3163.jpg
Views: 1170
Size:  44.1 KBName:  IMG_3164.jpg
Views: 1185
Size:  25.0 KBName:  IMG_3165.jpg
Views: 1148
Size:  25.0 KBName:  IMG_3166.jpg
Views: 1130
Size:  24.8 KBName:  IMG_3167.jpg
Views: 1159
Size:  29.6 KBName:  IMG_3168.jpg
Views: 1145
Size:  20.1 KBName:  IMG_3169.jpg
Views: 1233
Size:  26.8 KBName:  IMG_3170.jpg
Views: 1121
Size:  23.8 KBName:  IMG_3171.jpg
Views: 1129
Size:  20.2 KBName:  IMG_3172.jpg
Views: 1197
Size:  17.7 KB

    Alrighty then now that I'm not scrambling to meet deadlines I can finish my build log.

    Name:  IMG_3173.jpg
Views: 1166
Size:  15.0 KBName:  IMG_3174.jpg
Views: 1184
Size:  21.3 KBName:  IMG_3175.jpg
Views: 1178
Size:  26.5 KBName:  IMG_3177.jpg
Views: 1169
Size:  19.9 KBName:  IMG_3179.jpg
Views: 1197
Size:  59.5 KB
    The Mosfet Heat sinks don't really flow well with the theme I am going for. So I took them off, removed the Red portion of the heat sinks(each side is held in with 2 screws), Taped off the contact points on the bottom, and shot them with the same hunter green I used for the fans.

    Name:  IMG_3183.jpg
Views: 1144
Size:  22.0 KBName:  IMG_3184.jpg
Views: 1149
Size:  35.6 KBName:  IMG_3185.jpg
Views: 1146
Size:  20.5 KBName:  IMG_3186.jpg
Views: 1170
Size:  17.9 KBName:  IMG_3187.jpg
Views: 1130
Size:  21.8 KBName:  IMG_3189.jpg
Views: 1159
Size:  52.7 KB So I have a love hate relationship with EK. You see as a modder I pride myself on voiding warranties. However the Diabolical Geniuses at EK have made this impossible with the new Supremacy EVO water block. You see it is designed to be taken apart. They even provide you the tools to do so. -Shakes Fist- In doing so I thought it would be wise to paint the bracket Green.

    Ok at this point I was almost scared. I wasn't going to meet my deadline.
    Name:  IMG_3220.jpg
Views: 1144
Size:  30.2 KBName:  IMG_3221.jpg
Views: 1174
Size:  33.2 KBName:  IMG_3223.jpg
Views: 1162
Size:  30.0 KB
    Got the tape down for the stripes to represent the sweater and shot over the Red Paint with the Green....Whenever you put tape over paint make sure it is Low Tack Painters Tape and that the paint has had time to cure. If the paint has not cured all the way it will come right off when you take the tape off.

    Now that the stripes are done I can get started on the PSU. First up lets take a good look at it. Name:  IMG_3228.jpg
Views: 1173
Size:  42.1 KBName:  IMG_3230.jpg
Views: 1142
Size:  43.9 KBName:  IMG_3231.jpg
Views: 1084
Size:  27.6 KBName:  IMG_3232.jpg
Views: 1088
Size:  19.3 KBName:  IMG_3233.jpg
Views: 1088
Size:  39.3 KBName:  IMG_3234.jpg
Views: 1083
Size:  36.5 KBName:  IMG_3235.jpg
Views: 1083
Size:  24.6 KBName:  IMG_3236.jpg
Views: 1088
Size:  36.0 KBName:  IMG_3237.jpg
Views: 1085
Size:  27.2 KBName:  IMG_3238.jpg
Views: 1090
Size:  27.2 KBName:  IMG_3239.jpg
Views: 1082
Size:  51.5 KBName:  IMG_3240.jpg
Views: 1081
Size:  33.2 KBName:  IMG_3241.jpg
Views: 1082
Size:  31.3 KB
    Attached Images Attached Images  
    Last edited by Dirty South PC Mods; 11-07-2014 at 09:45 AM.

  2. #2

    Join Date
    Jul 2014
    Location
    La Rochelle, France
    Posts
    26
    i really don't see the point with the colours. Really. Man, brown, red and darkclayish green... are you planning to do some military style mod ?
    Bye,
    B

  3. #3
    Freddy Krugers Sweater is Green/Red Stripes and his hat is Brown Name:  freddy-krueger-001.jpg
Views: 1078
Size:  25.7 KB

  4. #4

    Join Date
    Jul 2014
    Location
    La Rochelle, France
    Posts
    26
    hmm ok missed the name, like, you know, it's part of US culture and all the stuff i'm not much into ^^
    Will you sleeve the cables ?
    Bye,
    B

  5. #5
    Master of Futility onevoicewild's Avatar
    Join Date
    Nov 2014
    Location
    Oklahoma USA
    Posts
    28
    You are turning this into a pretty cool looking build nick.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Fractal Announces New Micro ATX Case the Node 804
    By Dewayne in forum Main Page News
    Replies: 0
    Last Post: 03-12-2014, 10:40 AM
  2. AMD Ask Ben Heck to Build Some Crazy Case Mods
    By Dewayne in forum General Modding Talk
    Replies: 1
    Last Post: 03-07-2013, 09:48 AM
  3. SD PC Mods Contest Build Log
    By SDPCMods in forum Modding Work logs
    Replies: 4
    Last Post: 09-16-2011, 02:35 PM
  4. Freddy Krueger: Registered Offender
    By Fluffy in forum Talk Freely
    Replies: 1
    Last Post: 11-01-2008, 04:01 AM
  5. Dirty!
    By s3cur17y in forum Talk Freely
    Replies: 31
    Last Post: 01-09-2007, 08:14 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •