Results 1 to 9 of 9

Thread: ASRock M8K

  1. #1

    ASRock M8K

    Hello members and friends of our great mod community.

    Here the beginning of my attempt to do some nice things to a great system: A beautiful ASRock Z97 M8. The challenge is to transform it into a barebone mod with water cooling.

    When ASRock contacted me and asked me the question "do you see potential in modding this one" I couldn't say no off course. Then they did me an offer to actually do this, when I said I wanted to put this one under water

    Big thanks goes out for this beautiful deal to Red Hung "ASRock HQ" and Peter "ASRock Benelux"

    Also big thanks to Niko and Peter from EKWB

    And big thanks goes to Harry from Corsair

    It all started with the ASRock box that was delivered at work and was transported safely by me to the MbK modcave.

    First unboxing on the dining table

    And a great case emerged designed by BMW Group DesignworksUSA

    The M8 is sold as a barebone system, which only includes a chassis, power supply, mini-ITX motherboard, fans and optical disk drive.

    - Intel® Z97 Motherboard Inside
    - Supports 5th, New 4th and 4th Gen Intel® Core Processors
    - A-Command with G-sensor integrated
    - Creative SoundCore 3D 7.1 CH HD Audio with Nichicon Fine Gold Audio Caps
    - 2T2R WiFi 802.11ac + Bluetooth 4.0
    - SFX 600W 80 Plus Gold Power Supply
    - XSplit 3 Months Premium License
    - ASRock Cloud, ASRock Key Master

    Nice specs:

    And time to open the small beast Rear side is already great

    The front and quickly installed a GTX780 TITAN... see if it fits

    Perfect!!! And still space left

    Beautiful semi-modular 600W power supply in it

    Then it was time to disassemble everything

    Good overview at the heart of the M8... The Z97-M8

    Looks good!!!

    It's possible to install a total of 5 SSDs, or 1x 3.5 "HDD and 4 Pcs 2.5".
    In this one will come 4 SSDs

    After a night of brainstorming I decided to go up. For this I've used aluminum tubes with acrylic tubes and made a bracket in the middle. And not to forget placed some custom sized acrylic plates.

    Also used some Banchetto rubber feet.

    And there it is!!!

    To be continued!!!
    Last edited by kier; 11-26-2014 at 11:55 AM.

  2. #2


    First of all, a few nice shots of a new CPU block from EKWB: The EK-Supremacy EVO

    A very nice block onto a not too big mobo looks like a full cover block, so saves money !!!

    Looking for the right color regarding the bars: Titanium gray or glossy red

    What do you guys think?

    Remember there will be rigid tubing, with red liquid (no pastel this time) in it.

    I was also trying some stuff with a custom cover for the section beneath and in this an aquatube....

    But don't like this. So delete!!! Bottom remains open now, with all the WC stuff in sight.

    I did drilled some holes in the aquatube to place red LEDs. What gives a pretty nice effect.

    Finally I want the PSU turned the other way for future ideas

    Original position:

    Made a custom plate which is mounted onto the bracket for the optical drive.

    Turned the PSU, made another bracket to secure the PSU.

    More to come!!!
    Last edited by kier; 11-26-2014 at 11:55 AM.

  3. #3
    Master of Futility onevoicewild's Avatar
    Join Date
    Nov 2014
    Oklahoma USA
    When I looked at this on the forums I didn't realize what case you were using. I love the looks of that case, but it's just to small. Seems like you fixed that problem, very inventive solution, it keeps the essence of the case but gives you enough room for cooling gear.

  4. #4
    Quote Originally Posted by onevoicewild View Post
    When I looked at this on the forums I didn't realize what case you were using. I love the looks of that case, but it's just to small. Seems like you fixed that problem, very inventive solution, it keeps the essence of the case but gives you enough room for cooling gear.
    It is small yes, but it can be a system with a lot of power. ASRock didnt believe me when I told them about the water cooling. But they didnt expect me to go up

  5. #5


    A new update with nice progress. First I made a cover of acrylic 5mm to keep the focus on the mobo.
    And I used the M8 box for cable entry from the back for a nice effect

    Placed some LEDs

    And more LEDs

    Then came great packages from EKWB and Corsair

    Beautiful memory: the Corsair Vengeance (CMSX16GX3M2A1600C10)

    A great block for my GTX780. De EK-FC780 GTX Ti

    And a backplate

    Once installed...

    Placed and looks perfect

    Received 4 new Corsair SSDs, placed and made some SATA power cables.

    The Corsair Force Series™ LX 128GB SATA 3 6Gb/s

    Everything fits like I want, so started with the loop.

    Placed the reservoir again, but now with a drain port attached to it.

    The radiator I'm going to use is a EK-CoolStream PE 240

    With Corsair AF120-LED Quiet Edition red fans:

    Placed like this

    And a nice shot to finish this update.

  6. #6


    It took a while, but here's a new update.
    First special thanks goes to Corsair for sending a great game gear set

    Among this a great keyboard. the Corsair Vengeance® K70 Anodized Black — Cherry MX Brown

    Super nice keyboard

    Swap the buttons is first thing to do

    Looks pretty sexy

    Also there was a great dual-sided Gaming Mouse Mat MM600

    More about this set later!

    We left off with connecting the rigid tubing. Connected the CPU with right angles going down.

    Which comes out by the radiator and from here it goes to the GPU.

    Going from right to left

    And so comes out to the left from the GPU while the right goes to the pump.

    On the right side also a link from the radiator to the inlet reservoir and created a fill port from the middle inlet reservoir. The lower outlet from the reservoir is going to the pump inlet.

    Then it was time to fill it with my favorite red: Mayhems Pastel Red

    Testing went well, so next: Small adjustment + final photo shoot.

    Happy new year my modding friends!!!

  7. #7


    A small update in this old year before I post the final shoot update in the new year

    The front was missing something so I have placed some acrylic pieces.
    First played with the amount of the pieces, to see what is best.

    3 layers connecting nicely against the aquatube.

    Nice, but think 3 is to much.

    After some sawing, filing, drilling, tapping screws, this is the result

    And the build is finished !!! But first... still have two great products left from the Corsair game package:

    The beautiful Raptor M45 Gaming Mouse

    En last but not least, a perfect Corsair Raptor HS40 7.1 Gaming Headset

    Again thank you so much Corsair for this great game gear

    Back to the build .... After all stuff installed, it is ready for use, and ready for the final photo shoot

    Till next year with the final photo shoot!!!

  8. #8

    Final Update!!!

    Final pictures are there.

    Enjoy my friends!!!

    Big thanks goes to:




  9. #9
    Very cool photo - like a spaceship !!))) Wow !!
    Last edited by sova53; 03-06-2017 at 11:53 AM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 0
    Last Post: 07-17-2015, 04:04 PM
  2. ASRock Motherboards are Windows 10 Ready - Modders-Inc
    By Dewayne in forum Main Page News
    Replies: 0
    Last Post: 07-03-2015, 04:31 PM
  3. Replies: 0
    Last Post: 06-17-2015, 12:20 AM
  4. Two New AM3+ 970 Motherboards Announced by ASRock
    By Dewayne in forum Main Page News
    Replies: 0
    Last Post: 03-28-2015, 05:34 PM
  5. M8 Series – ASRock Inc. WIns ANOTHER AWARD! iF
    By Dewayne in forum Main Page News
    Replies: 0
    Last Post: 01-27-2014, 02:57 PM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts