Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Quakecon 2015 Modders-Inc Staff vs Staff Mod Off Entry "Ultra-Violence"

  1. #1

    Quakecon 2015 Modders-Inc Staff vs Staff Mod Off Entry "Ultra-Violence"

    Hey hey guys Nick Blackwell from Dirty South PC Mods here with another awesome themed build for you guys. This time it is based off of the Doom series of video games. This one I am going to call "Ultra-Violence" witch is the second most hardest difficulty level in the game.

    This project is brought to you by the good folks at Thermaltake

    Name:  TT-Logo_zps0a41c32e.jpg
Views: 819
Size:  22.1 KB


    First up lets take a look at the Case we will be using as a platform for our build. The Thermaltake Core X1 ITX Chassis.

    Name:  IMG_3897.jpg
Views: 824
Size:  62.4 KB

    Name:  IMG_3899.jpg
Views: 805
Size:  35.0 KB

    Name:  IMG_3901.jpg
Views: 797
Size:  72.4 KB

    Name:  IMG_3902.jpg
Views: 832
Size:  48.4 KB

    Name:  IMG_3903.jpg
Views: 804
Size:  40.2 KB

    Name:  IMG_3904.jpg
Views: 869
Size:  50.0 KB

    Name:  IMG_3906.jpg
Views: 801
Size:  41.8 KB

    Name:  IMG_3907.jpg
Views: 793
Size:  36.9 KB

    Name:  IMG_3909.jpg
Views: 814
Size:  38.9 KB

    Name:  IMG_3910.jpg
Views: 839
Size:  17.2 KB

    Name:  IMG_3911.jpg
Views: 829
Size:  15.9 KB

    Name:  IMG_3912.jpg
Views: 840
Size:  34.0 KB

    Name:  IMG_3913.jpg
Views: 814
Size:  31.6 KB

    Name:  IMG_3914.jpg
Views: 818
Size:  13.2 KB

    Name:  IMG_3915.jpg
Views: 814
Size:  14.0 KB

    Name:  IMG_3916.jpg
Views: 803
Size:  29.3 KB

    Name:  IMG_3917.jpg
Views: 816
Size:  23.6 KB

    Name:  IMG_3918.jpg
Views: 797
Size:  27.9 KB

    Name:  IMG_3919.jpg
Views: 835
Size:  29.4 KB

    Name:  IMG_3920.jpg
Views: 817
Size:  38.2 KB

    Name:  IMG_3921.jpg
Views: 796
Size:  29.4 KB

    Name:  IMG_3922.jpg
Views: 828
Size:  31.3 KB

    Name:  IMG_3923.jpg
Views: 808
Size:  30.3 KB

    Name:  IMG_3924.jpg
Views: 851
Size:  30.9 KB

  2. #2
    Alright first thing is to get the factory paint off so I can get down to the metal for what I want to do.
    Name:  IMG_4372.jpg
Views: 831
Size:  34.6 KB
    Name:  IMG_4373.jpg
Views: 807
Size:  18.9 KB
    Name:  IMG_4374.jpg
Views: 828
Size:  42.0 KB
    I am using Easy-Off Oven Cleaner to strip the paint off.

  3. #3
    Hi,

    I can't wait to see the: Ultra-Violence case at qcon!!!

    DG

  4. #4
    Ok so the paint had a ceramic in it so the Easy-Off didn't work. But a 4" angle grinder and some 60 grit Flapper wheels rips that stuff right off.
    Name:  IMG_4437.jpg
Views: 796
Size:  44.4 KB

    Name:  IMG_4438.jpg
Views: 797
Size:  44.3 KB
    Name:  IMG_4439.jpg
Views: 822
Size:  42.0 KB
    Name:  IMG_4440.jpg
Views: 803
Size:  43.8 KB
    Name:  IMG_4441.jpg
Views: 798
Size:  31.7 KB
    I love my 4" grinder. I use it so much I have gotten almost surgical with it.

    Name:  IMG_4473.jpg
Views: 778
Size:  38.6 KB
    Ok you have seen me do a bunch of paint this time we are going to make rust. Remember always use the proper safety gear. What you are going to need is a clean empty 32oz sprayer bottle, 16oz bottle of Hydrogen peroxide, 8oz of vinegar, and 2oz of salt.

    Name:  IMG_4475.jpg
Views: 843
Size:  18.5 KB
    Now rust will form naturally on exposed metal over time. That's not something I have a lot of right now.

    Name:  IMG_4477.jpg
Views: 800
Size:  45.1 KB
    Name:  IMG_4479.jpg
Views: 825
Size:  49.2 KB
    Name:  IMG_4478.jpg
Views: 806
Size:  18.3 KB
    With this mixture we rapidly accelerate the process to a matter of seconds.
    Last edited by Dirty South PC Mods; 05-28-2015 at 09:06 PM.

  5. #5
    Awesome , can't wait to see where this is going! Subbed!

  6. #6
    Ok so after a couple nights it changed to a darker color.
    Name:  20150529_123435.jpg
Views: 803
Size:  31.3 KB
    Name:  20150530_114501.jpg
Views: 809
Size:  36.0 KB
    Time to play with my airbrush.

    Name:  IMG_4522.jpg
Views: 811
Size:  29.1 KB
    Name:  IMG_4523.jpg
Views: 782
Size:  28.9 KB
    Name:  IMG_4525.jpg
Views: 755
Size:  26.3 KB
    In the regular light you can barely see the Green but when you turn on a UV Light things change.

    Moving on to the Motherboard we will be using for our build. A MSi Z97M Gaming MATX motherboard. Keep in mind this is a ITX case.
    Name:  IMG_4527.jpg
Views: 794
Size:  29.7 KB
    Name:  IMG_4528.jpg
Views: 795
Size:  12.0 KB
    Removed the heatsinks now since these are Aluminum.With the same process as the case. I will actually have to strip the anodizing to get to the raw aluminum to oxidize it.
    Name:  IMG_4529.jpg
Views: 752
Size:  34.8 KB
    Name:  IMG_4530.jpg
Views: 807
Size:  37.9 KB
    Ok this is what it looks like after its been oxidized then shot with Matte Clear....Next is the mosfets.

    Name:  IMG_4532.jpg
Views: 802
Size:  27.3 KB
    alright after most of the anodizing has been removed. I decided to use the Air-Brush and the UV green on the spines. The center pieces were soaked in Drain cleaner for about 30 min then washed and scrubbed with a medium bristle brush. Then everything was coated in a Matte Clear.
    Name:  IMG_4535.jpg
Views: 766
Size:  27.0 KB
    Name:  IMG_4536.jpg
Views: 814
Size:  22.4 KB
    Now I just gotta wait for everything to dry and put it back together.

  7. #7
    Hi,


    Ty for posting pics!

    Coming along nicely!!


    DG
    DG

  8. #8
    Here is a quick video on the rusting process.


    Ok we have a total budget of $250 value we can use for materials. This includes material you already have. So far

    I have used
    $25 worth of sheet metal
    $30 worth of sleeving
    $15 for a piece of aquarium hose
    $9 for the two cans of Rustolium Matte Clear
    $6 one bottle of UV Green Airbrush Paint
    That's a total of $85 $250-$85=$165 left for material. I'm trying to keep it as frugal as possible without compromising in quality, so you can see that you really don't need to spend a lot of $ in high-end material to have a nice mod. You just have to use a little imagination.

    Alright moving on to the radiators.
    Name:  IMG_4599.jpg
Views: 752
Size:  40.4 KB
    Name:  IMG_4600.jpg
Views: 790
Size:  63.7 KB
    Name:  IMG_4603.jpg
Views: 725
Size:  43.1 KB
    Name:  IMG_4604.jpg
Views: 767
Size:  36.1 KB

    It's interesting to see the effect the solution has on different metals. Some oxidize faster than others. Alos used the Air-brush to add a bit of UV Green for the corrosive effect.

    Name:  IMG_4573.jpg
Views: 776
Size:  29.9 KB
    Name:  IMG_4582.jpg
Views: 784
Size:  19.3 KB
    Ok so for the front. we took the black 200mm fan and painted it UV green, then took a strip of Green 5050 LEDs and put them on the inside. In addition to that they are hooked up to a wireless dimmer control.

    Here is a quick look at the effect the dimmer has.....Don;t worry about the clicking sound one of the LED chips was getting tapped by a fan it has been isolated.

    Ok so I was at $165 the LED strip was $15 /w controller, the can of paint I used is $4. So $165-$19 Leaves me with $140 left to play with.
    Last edited by Dirty South PC Mods; 06-11-2015 at 11:27 AM.

  9. #9
    Ok I'm back after a looooooong 5 days of no modding due to my hand being mauled by my cat.

    Name:  IMG_4633.jpg
Views: 724
Size:  25.9 KB
    Name:  IMG_4634.jpg
Views: 746
Size:  27.9 KB
    Name:  IMG_4640.jpg
Views: 705
Size:  30.2 KB
    Hey guys my hand is finally functional after getting mauled by my cat. Time to start cranking on the "Ultra Violence" Build....One of the problems I have encountered in this build is how am I going to make the plastic look old....It doesn't corrode like metal does...It just fades over time.....So I tried something and it seams to work.......Matte Clear......Spray the whole thing with a coat.....then come back and spray random spots again....keep doing it till you get the desired effect.....I think I might do a video on this one.

    Name:  IMG_4641.jpg
Views: 695
Size:  43.0 KB
    To get the effect I am going for. I need to cut a massive 200mm hole in the front panel.
    Name:  IMG_4642.jpg
Views: 699
Size:  60.3 KB
    Then hit it with the flapper wheel to strip most of the paint off.
    Name:  IMG_4652.jpg
Views: 697
Size:  35.9 KB
    Then after a bit of rusting, and UV green we have this.

    Name:  IMG_4649.jpg
Views: 682
Size:  53.8 KB
    Name:  IMG_4650.jpg
Views: 711
Size:  32.0 KB
    Name:  IMG_4654.jpg
Views: 679
Size:  25.4 KB

    Now that the case is done time to move on to the GPU. Going to be using a Powercolor R9 270X Devil. It's going to be staying air cooled just needs a bit of a makeover.
    Name:  20150618_165641.jpg
Views: 701
Size:  52.8 KB
    Originally it was Black and Red. It was repainted for a previous build so needless to say I need to remove the paint.
    Name:  20150618_170317.jpg
Views: 728
Size:  34.9 KB
    Name:  20150619_102655.jpg
Views: 745
Size:  40.9 KB
    It's soo cool to watch paint thinner do it's thing.
    Name:  20150619_115529.jpg
Views: 702
Size:  33.1 KB
    Ok for the GPU I am going to try a third method for making things look old. this method requires several layers of paint and salt?
    Name:  20150619_115840.jpg
Views: 678
Size:  25.9 KB
    First a layer of Red.
    Name:  20150619_120054.jpg
Views: 692
Size:  27.5 KB
    Then add a bit of Brown in random spots.
    Name:  20150619_121053.jpg
Views: 684
Size:  31.1 KB
    Once the Red and Brown have dried to the touch. You sprinkle some table salt in random spots.
    Name:  20150619_121339.jpg
Views: 686
Size:  35.5 KB
    Once you have sprinkled the salt. Shoot your top coat over the salt.
    Name:  20150619_140904.jpg
Views: 691
Size:  24.0 KB
    Then once the top coat has dried you shake/wipe off the salt. I am going to be adding a bit of UV green to mine.
    Name:  IMG_4656.jpg
Views: 651
Size:  34.7 KB
    Name:  IMG_4660.jpg
Views: 675
Size:  30.7 KB
    Name:  IMG_4659.jpg
Views: 695
Size:  34.3 KB
    Name:  20150620_110333.jpg
Views: 686
Size:  39.8 KB
    And there we go. now to do something about these wires.
    Name:  20150620_110856.jpg
Views: 671
Size:  23.4 KB
    Ok for the wires I am going to use a piece of Aquarium hose left over from my Filtration system. It's going to be used as a conduit for the front panel cables...Since it is plastic I am going to use the Matte Clear and UV Green trick.
    Name:  20150620_124152.jpg
Views: 728
Size:  42.7 KB
    Wires what wires.
    Last edited by Dirty South PC Mods; 06-20-2015 at 03:55 PM.

  10. #10
    Painted XcaliburFX's Avatar
    Join Date
    Oct 2007
    Location
    Ga ... U.S.A.
    Posts
    516
    Looking good Nick.


    "Moddin' ... Ain't It Cool!"


Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 0
    Last Post: 08-10-2015, 04:47 PM
  2. Quakecon 2015 - Staff vs Staff Mod Off: Insomniac
    By IdiotWithGuns in forum Modding Work logs
    Replies: 3
    Last Post: 07-16-2015, 09:24 PM
  3. Replies: 4
    Last Post: 07-05-2015, 04:04 AM
  4. Quakecon 2015 - Staff vs Staff Mod Off: DOOM'ed
    By Dewayne in forum Modding Work logs
    Replies: 0
    Last Post: 07-04-2015, 07:35 PM
  5. Quakecon 2015 Staff Vs Staff Case Mod Off- Writing On the Walls
    By llGl1tchll in forum Modding Work logs
    Replies: 3
    Last Post: 07-01-2015, 09:24 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •