Page 4 of 4 FirstFirst ... 234
Results 31 to 37 of 37

Thread: Bulldozer project - AMD Tribute

  1. #31
    Here is one long overdue update.. bodywork is taking much longer than i anticipated

    I ended up saving me the trouble with doors that open like this.. so the original idea --- to the water







    Made my life allot easier when it came to cooling fans can now be securely mounted to the side pannel XD





    Also, now everything seems to fit perfectly >.>



    And some finishing bodywork, tiny air bubbles gave me allot of problems after sanding...




    In the end it was worth it... Just perfect





    Also, one more idea that took me, Idiot, almost entire day and it was complete bust!





    Also, i figured that if i paint over the dry body kit, it will give it a bit of strength so i ended up doing that and it made my life easier, I paint it when i am done, and than, when i am back from work tomorrow its nice and solid, doing this saved me from allot of scratches



    The back fan mounted ( the one that cools the back of the socket ), i must add that when i did measurements for the cuts, i wanted to make it octagonal, i kind of dig the lines.. i think i will pinstripe them on it... Also the fan is mounted to the plate, that is than mounted to the case...









    Checking if the cables fit the hole i made, it will be awesome when i put the sleeved cables there with cable combs there






    There, I hope you guys like the progress i made, i will take liberty to say that it the case as a case should be done in a week, and the water cooling components and components should be fixed inside few weeks after that total...

  2. #32
    Been a while since i posted, and loads of things happened since than

    Enjoy the slideshow XD

    Top part still needs some minor adjustments, it now opens quite nicely with some support from suspensions







    I dont know about you, but it looks more massive than it used to

    Next in line is the finished front piece remaster!







    next, experimenting with paint/foils




    Here you can see how the roof holds with suspensions when open

    And the last, i really think you will like it, 95% finished product XD







    Bare in mind that the foil didnt set as it should have, and i will re-do it, the glue needs to be heated and i didnt have good dust free chamber, i redid it and the finished pictures will be out soon, only thing left for me to do now is fill it with components , loads of little details finished as well, this is just a preview! Finished pics will come out when i have it all working!

  3. #33
    Hello guys and really sorry for not updating, i have had some massive lack of time so i didn't get to do anything that i wanted. This is a little tease and i promise i will post full update log once i get time to work on it . Also, tomorrow is the day i fire this thing in its cage as i have been running the system hihihi.

    So here it is for now:



    Brm brm brrrrrrmmm

  4. #34
    Oh some thing i think you are gonna like that has been done to the mod

    16mm Copper tubing:



    Changed the board rotation, its laid down now:



    Added professional grade backplane



    And the drawers:



    and the look before painting from different perspective:



    Also, the 480EKWB rad with 8x CoolerMaster Jetflo:



    New ones come tomorrow, enjoy!

  5. #35
    So i have been doing what seems to be the biggest problem... how to make roof and still look sharp
    i think this will be ok, and not make the roof stand off too much, the roof consists out of board and a U profile, the sides will go on the inside of a U profile, and also it will house a led strip that will illuminate interior, now, should i put yellow or red that is still something to decide.





    This is another problem i have had. The waterblock came w/o a backplate, and i love backplates, keeps the board from bending and gives it stiffness, so i drilled the holes in my existing backplate to widen the screw holes that were there so the screws for my waterblock could go trough. it works, now i will need to reinstall it



    till the next time, feel free to comment, good/bad, its all cool

  6. #36
    Dry fitting the pipes to the current look, there will be another pipe that will go on the other side of the 24 pin that will go from GPU to res, but will go under than it will come back up, to res






    I hope you like the progress so far, as i was unable to work on it for good few months due to some problems i have had :/

  7. #37
    So, i bet this is the thing you didnt expect to see
    I switched to below tubing to soft tubing in order to have a little more flexibility and room for working, also i made it so that the top part is able to tip over so i can clean, manage cables, etc etc.. This is the last big change in the overall mod and it will go under water tomorrow after some details and immense cleaning, dusting, alcohol bath and all

    Here are some pictures, i really hope you will enjoy them












Page 4 of 4 FirstFirst ... 234

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. AMD Bulldozer Featured in Micro Center Ad!
    By TheGreatSatan in forum Talk Freely
    Replies: 3
    Last Post: 09-10-2014, 01:29 AM
  2. AMD's Bulldozer Tribute PC - FINISHED!
    By TheGreatSatan in forum Modding Work logs
    Replies: 69
    Last Post: 02-04-2012, 11:10 PM
  3. A Tribute.... Will name it properly later.
    By Tazz in forum Modding Work logs
    Replies: 14
    Last Post: 10-23-2011, 04:00 PM
  4. Modders-Inc tribute
    By senior98 in forum Talk Freely
    Replies: 8
    Last Post: 08-28-2006, 08:16 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •