Page 1 of 2 12 LastLast
Results 1 to 10 of 16


  1. #1


    Hi guys,

    I'm back with another case mod, this time with Corsair!

    I'll be using their SPEC-ALPHA case to create a special case mod to showcase the new ASUS STRIX GTX 1080 graphics cards!

    This project*will be inspired by an HRC (High Resolution Computers Shop) build in the same case. For those that don't know HRC, you can check out their page here and the SPEC-ALPHA mod they did here.

    When I say inspired, I mean the open-frame design of the build, I'll be doing some things a bit different

    I'd like to thank NVIDIA ANZ, ASUS ANZ, Corsair, Bitspower and CableMod for their support on this build! I'd also like to thank all those who follow my build logs or follow my page through social media and share the same passion with me! All my builds would not be the same without sharing them with all of you!

    I'm on a very strict deadline to get this build finished for an upcoming event so the build log updates may sometimes be delayed to what I'm actually working on.

    Hope you guys will enjoy this one!

    Onto the SPECS:

    CASE - Corsair Carbide SPEC-ALPHA
    CPU - Intel Core i7 5930K
    MB - ASUS ROG STRIX X99 Gaming
    GPU - 2 x ASUS STRIX GTX 1080s
    SLI - NVIDIA High Bandwidth SLI Bridge 3-Slot
    RAM - 64GB Corsair Dominator Platinum DDR4 2800Mhz (8x8GB) with Light Bar Upgrade Kit
    SSD - Corsair Force LE 480GB x 2
    PSU - Corsair HX1000i

    Custom Cables & LEDs - CableMod

    Custom Watercooling

    CPU - Bitspower Summit EF
    RES - Bitspower Water Tank Z-Multi (Clear acrylic)
    PUMP - Bitspower DDC Plus with Bitspower DDC Upgrade Kit
    RAD - Bitspower Leviathan Xtreme 360
    FITTINGS - Bitspower Matte Black - various
    TUBING - Bitspower 12mm Acrylic
    FANS - Corsair Air Series SP120 Quiet Edition x 4
    COOLANT - Mayhems Aurora Silver

    I'll start of with a pic of the Corsair hardware all together! I'm also planning on doing a few video updates for this build as well.

    Stay tuned, should be an exciting build/mod!


    Last edited by alexciobanu; 07-04-2016 at 05:40 AM.

  2. #2

    Hi guys,

    First update for the build and I decided to make a video.

    Hope you guys enjoy a quick unboxing and disassembly of the case and I also talk a bit about the mod

    Quick note after watching the video, the black section of the top panel came off pretty easily in the end. There were more clips that I missed the first time so no heating was needed.

    Pics of the case too before I hack into it :P

    Thanks for checking it out and stay tuned for more!


    Last edited by alexciobanu; 07-04-2016 at 05:41 AM.

  3. #3

    Hi guys,

    Most of the major mods have now been done on the case! All that's left is to make it look pretty!

    Covered the cuts with acrylic and this will be covered with vinyl.

    Also painted the inside of the front and top panel green.

    Stay tuned for more!


    Last edited by alexciobanu; 07-04-2016 at 05:41 AM.

  4. #4

    Hi guys,

    Hope you like the banner, thanks to MercoMods for designing this!

    Here's a look at more of the mods done. Fan rings have been painted green as well as some vinyl work for them along with the PSU and SSDs. I'll have another video up soon and more pics

    You'll see in the next update why the vinyl on the PSU is offset.

    Thanks for checking it out and stay tuned for more!



  5. #5

    Hi guys,

    Back with another update and another video

    All of the mods are now completed on the case. I talk a bit about what's been done and show the case in the video. If you guys are liking these video please subscribe to my channel on YouTube, I'll try and do other things as well as I keep improving.

    Also here are some shots of the case.

    Hope you guys like it!



  6. #6

    Time to start building with some sweet hardware!

    Stay tuned!

  7. #7

    Hi guys,

    Sorry for not updating the build log for a few days, I've been away on a little trip and then got busy with work

    As some of you may be aware, the NVIDIA Pascal Launch Party took place in Melbourne this past Thursday July 7th where they showcased a whole lot of GTX 1080s and 1070 from different vendors as well as HTC Vive demos of the awesome NVIDIA VR Funhouse and of course the worlds first exclusive look at the new GTX 1060.

    I was very fortunate to have been flown to this event and get to experience it all and no doubt the PROJECT ALPHA OMEGA build was there too! I worked hard on getting it ready in time for the event and unfortunately didn't have time to film any more videos or photos as I was building into it.

    The build did very well and got quite a lot of attention which was a good way to showcase the GTX 1080 graphics cards inside it. The open frame design of the case helped showcase the hardware even more.

    Here are some teaser photos of the build at the event as well as some other photos throughout the NVIDIA Party. Sorry for the poor quality, they were all taken on my phone

    I'll also leave you with some hardware pr0n photos

    Thanks for checking it out guys! Stay tuned for final pics, more videos of the completed build and after, more watercooling :P



  8. #8
    The Main Man Dewayne's Avatar
    Join Date
    Mar 2006
    Nice looking rig!
    Cut it, Paint it, Mod it. Void Your Warranty #moddersinc @moddersinc

  9. #9
    Quote Originally Posted by Americanfreak View Post
    Nice looking rig!
    Thanks a lot Dewayne! Glad you're checking it out

    - - - Updated - - -

    Hi guys,

    I have some good and bad news unfortunately. The good news is, the build has just come back this morning from Melbourne and the bad news is that it is slightly damaged. It seems like the bottom of the box took at little hit.

    There's a bit of a dent at the bottom however it can easily be put back with some hand force. I'm guessing from the shock as well that the acrylic on the front panel was shaken a bit and it ended up going into the fans scratching the green painted rings.

    I'll be spending a couple of days this week on it before I bring you the final photos

    However, for now I'll leave you with this quick video I took of the Bitspower waterblocks for the ASUS ROG GTX 1080 Strix graphics cards that I have in this build atm which will eventually go on the two cards

    A few things I forgot to mention in the video. The waterblock comes with no backplate as it is fully compatible with the original backplate on the card meaning you can still use the RGB features on the original backplate. That combined with the RGB feature in the waterblock and should be a pretty nice looking set up

    Also, I'm thinking with an extender as well as a splitter cable between two waterblocks, it should be able to be connected to an RGB controller on the new ASUS motherboards for more easy control.

    Hope you guys enjoy this small update.

    Stay tuned for more.



  10. #10

    Hi guys,

    Good news! The build is back in one piece and fortunately none of the components were damaged!

    Some quick phone snaps before the final photoshoot!



Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. [Project Log] - IN WIN G1 (modded In Win 909)
    By alexciobanu in forum Modding Work logs
    Replies: 26
    Last Post: 06-04-2016, 07:38 PM
  2. [Project Log] TOXIC CHROME (modded Corsair 250D)
    By alexciobanu in forum Modding Work logs
    Replies: 34
    Last Post: 01-10-2016, 05:10 PM
  3. [Project Log] - CANIS MAJORIS (modded Tt Core X9)
    By alexciobanu in forum Modding Work logs
    Replies: 29
    Last Post: 01-03-2016, 06:21 AM
  4. BA0 - Bravo Alpha Zero - De-Treminator Mod
    By ShamanS in forum Modding Work logs
    Replies: 6
    Last Post: 11-17-2009, 04:25 PM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts