Results 1 to 10 of 29

Thread: [Scratch build] Floating Cave

Threaded View

  1. #11
    mr.maler's Avatar
    Join Date
    Apr 2017
    The front panel has to be fixed from the backside. Thereís only room for the fixing screws at the lower end. So I have to use a strong U-shaped profile and two M4 screws. To prevent the upper end to swing, only the lower screw has a limit stop. The upper screw pulls the upper end of the front panel back and guarantees a strong fixation.

    I had to adapt several of my aluminium profiles and to add some nuts. But then I had a long awaited premiere: first time MB mounted in the new case.

    GP and soundcard had to join. I removed some parts of the energy chains to get the perfect length.

    I used an old power supply for adapting the mounting profiles. Picture shows work in progress (power supply still in oblique position).

    To mount the top plate of the reservoir I first had to add some threads.

    Last edited by mr.maler; 05-02-2017 at 10:25 AM.

Similar Threads

  1. Scratch Build: Rey's Speeder
    By Boddaker in forum Modding Work logs
    Replies: 41
    Last Post: 06-17-2020, 11:13 PM
  2. scratch build m-atx
    By majormech46940 in forum Modding Work logs
    Replies: 0
    Last Post: 08-04-2016, 11:11 AM
  3. [scratch build] wall mounted pc
    By modderator in forum Modding Work logs
    Replies: 2
    Last Post: 04-10-2016, 03:26 PM
  4. [Scratch Build] Interior Des(k)ign
    By Wejjy in forum Modding Work logs
    Replies: 24
    Last Post: 06-02-2012, 01:56 PM
  5. The XICLE (EvO+) Build from Scratch
    By masbuskado in forum Modding Work logs
    Replies: 29
    Last Post: 02-01-2009, 12:15 AM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts