Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 29

Thread: Achromodic - by Boddaker

  1. #11
    Quote Originally Posted by IdiotWithGuns View Post
    Amazing work!
    Love the dremel work you've done.
    Thanks! but all the webbing was actually cut with a laser. ..although I have done quite a bit of dremel work, so I'll take the compliment anyway! :P
    www.bods-mods.com

  2. #12
    Boddaker, I don't know if you'll remember me from back in the TBCS days (I built blocky wooden nintendo characters), but I'm happy to see you again! I've been modding every year but haven't kept up on build logs until this year. I was searching around for new mod log websites and ran across here. Awesome to see you again, and this mod, as always with your mods, is looking stellar.

  3. #13
    Quote Originally Posted by thorkon View Post
    Boddaker, I don't know if you'll remember me from back in the TBCS days (I built blocky wooden nintendo characters), but I'm happy to see you again! I've been modding every year but haven't kept up on build logs until this year. I was searching around for new mod log websites and ran across here. Awesome to see you again, and this mod, as always with your mods, is looking stellar.
    Hey man, yeah I remember your mods.. I really dug that ship you did! Thanks for stopping in and saying hi.. I'll be looking out for your build logs.

    - - - Updated - - -

    Got more headway on the light panels over the weekend (since I wasn't able to attend the lan, I needed to stay away from the computer and all those taunting Steam alerts.. So I locked myself in the garage lol)

    Built the side walls for the back panel, added the led strip, and aluminum foil tape to keep all the light going one direction: thru the front.


    Light box mounted to the fan bracket..


    Fan bracket/light panel assembly mounted to the case frame..


    View from the inside of the case..


    Starting on the top light panel, I decided to do something different. I have two pieces of frosted 1/8" acrylic that, when sandwiched together, makes up the 1/4" panel. I was going to glue them up when I inadvertently reversed one over the other, and I liked what I saw..


    Since the panel is symmetrical, only the random holes cross over each other creating a more complex design, and adds depth. It will be interesting to see how the light shows through both pieces now.


    Adding the side walls..


    Placing in the case to figure mounting tab placement. The top fan/radiator bracket is the exact same as the one in the back, so I'll be mounting the light panel in the same way, with four aluminum tabs.


    Gotta adjust the gaps a bit between light panels, but overall fits well.




    Once I get the leds in and the panel mounted, I'll do a light test with all three panels. Hopefully tonight!
    www.bods-mods.com

  4. #14
    Just a quick update to show some teaser shots of the black chrome pieces. Should be getting these back in the next day or so.. Can't wait!

    Motherboard tray, top grill, and the two webbing pieces hanging (gold tubes not mine lol)


    Closer shot of the top grill..


    One of the two webbing pieces..


    Same webbing comparing it to regular chrome..


    Strix 1070 fan bezel..


    Front panel..


    Zadak511 SSD trim piece..


    Will get more detailed shots once these parts are back in my possession. Stay tuned!
    www.bods-mods.com

  5. #15
    One more: Top and bottom alu rails..
    www.bods-mods.com

  6. #16
    Had a great productive weekend! Made an extra webbing insert for the back light panel so it matches the double layers of the top panel. With the lights on, it creates some really cool shadow effects.


    Got started on the front light panel as well.. With the reservoir mounted directly in front of it, I needed to make some pass-thru holes for the in/out ports. Fortunately, the frosted 1/8" panel is transparent enough for me to see exactly where the fittings are.


    The view from the res side, and my markings seem to line up nicely.


    I used a 3/4" spade bit to start the hole, then finished it off with the dremel.


    With the Primochill flex compression fittings..


    ..and a view from the other side..


    Once that was done, I figured I'd make the pass-thru holes on the top panel as well. After marking the holes and seeing how close they were to the webbing, I decided to work them into the design, rather than having just perfectly round holes like the front panel. So I free-handed some random shaped holes to blend it in to the overall web pattern.


    ..and cut! I also added a couple smaller holes next to the main ones, but didn't go all the way through, just to enhance the effect.


    ..and with the white fittings..


    Lastly, I of course just had to see what it looked like with some black LRT flex tubing!


    Only thing left is to add the led strip to the front panel, and then all the light panels will be done!
    www.bods-mods.com

  7. #17
    The guys at EVGA sent over one of there new Z10 keyboards to mod, along with an X5 mouse and killer Torq mouse pad. I will of course be adding some webbing to the Z10 and painting it white so it matches the theme.


    And I finally got my chromed parts in! Unfortunately, some of the parts didn't get my seal of approval and will have to be sent back to be re-done. But here are the pieces that were acceptable.. the CPU block from CM's Maker 240 kit:


    The GPU bezel came out awesome:




    And both Zadak memory caps and SSD trim piece were acceptable..




    The motherboard tray was ok, but has issues too. luckily most of them will be hidden by the motherboard itself. But I was able to set it in place and see how it looked with all the light panels on: (sorry the camera in my phone sucks for lighting so everything is blown out)


    Shot of the finished front panel:


    And some better pics after extensive photoshopping lol:




    Still need some adjustment here and there, and I can now mark the bottom panel for cabling holes and such.
    www.bods-mods.com

  8. #18
    Well, I finally have some progress to show. I've been working on an idea for the back panel, but had to scrap several failed attempts, mainly due to 3D printing woes. But now that I revised my plan, redesigned the model, and fixed my printer, I finally have a workable piece!
    The idea was to fill the center of the back panel with a bunch of random, extruded, clear organic shapes that will be backlit by the 140mm fans. Simple enough! ...well not really. :P

    First, I had to come up with a 3D model, so I created a cluster of organic shapes derived from the webbed motherboard tray and fan grills. It's basically a reverse of that, in where the holes are now the solids. I then designed the cluster to be stackable end to end, making a seamless pattern so I could stack four of them to fill in the back panel. Here is the 3D printed quarter section:


    It fits nicely in the frame of the back panel.


    In order to make duplicates of this in clear resin, I need to make a silicone mold of it. So first I coat it with XTC to smooth out the print.





    While that cures, I whip up a quick box for the mold.


    Doing some volumetric calculations, I realize my box is too big for the small amount of silicone I bought, so I used some dense foam pieces to fill in around the print. Now I should be able to cover the entire piece without running out.


    I'm using a product from Smooth-On called OOMOO 30, which is a 2-part silicone rubber. Very easy to work with, just mix both parts 1:1 ratio. Working time is 30 minutes, cures in about 6hrs. .. but why do I feel the need to play Portal 2 now? :P


    Once mixed thoroughly, it turns to a uniform purple color. Some products require the use of a vacuum chamber to degas the mixture (remove all the bubbles), but this OOMOO stuff is formulated for beginners and doesn't really need it, due to it's low viscosity.


    After spraying on some mold release, we're ready to pour! Going around the edges with a long slow pour and letting the silicone flow into the piece by itself helps prevent any bubbles from forming.






    Now we wait while it cures.


    The next day I came back and started the demold process. I quickly found out that it was going to be impossible to get the print out in one piece. I could work it loose all around the edges, but the center was locked and I was starting to tear in places in between the towers. So I had to cut around each one and remove them one at a time.


    All out! Didn't take too long, but now I have to rethink my plan of making a resin copy all at once, because I won't be able to get it out of the mold in one piece. I will have to divide it up into smaller parts, or even do each shape individually.


    Next update will hopefully show some successful resin replicas of the original print. Fingers crossed!
    www.bods-mods.com

  9. #19
    Well I didn't get the resin poured over the weekend (turns out I need a scale to accurately measure out the two-part mixture), so instead I worked on the cabling layout, access holes, and SSD placement.

    Mocking things up, I ran the motherboard cabling down to the floor and marked where they would pass thru to the psu.


    On the other side under the mobo, I'll be needing an access hole for two USB3.0 cables & ethernet from the IO, as well as an SSD data cable and the HDMI cable from the video card.


    Luckily both USB and ethernet are located in the same place, so I just need to make one hole.


    Here's the video card hanging temporarily in place to see how much space is needed between it and the webbing. It also gives me an idea of what shape the mounting bracket will need to be.


    With everything marked, I could tear it all down again, and start drilling holes in the bottom light panel.


    I wanted to get the look of individual holes for the sleeved cables, but still have one main hole for each group of cables.


    For the Zadak SSD, I couldn't find any good place to mount it on the webbing, so I tried placing it right on the floor... but it sticks out too much because it's so thick. So I decided to flush mount it into the floor.


    Using the scroll saw, I cut a gigantic hole in the bottom light panel.


    Next, I needed to rout out some extra material at one end to make room for the cables.


    After some filing, the SSD fits nice and snug.


    Digging thru my closet o' spare parts, I came across an adata SSD mounting bracket. So I used that to support the SSD underneath.


    Here it is from the top.


    Now the SSD sits flush with the top of the light panel, and the cabling is hidden below.


    An overall shot of the bottom light panel with all the access holes drilled, ready for the sleeved cables!
    www.bods-mods.com

  10. #20
    Hey guys, getting back to the resin casting for the back panel finally.. I wanted to wait until I could show a decent amount of progress, and it took a while to cast multiple sets as the cure time was well over 24hrs.

    So after prepping the mold with a release to make sure the resin didnt stick, I started pouring. The EpoxaCast 690 from Smooth-On has really low viscosity so most of the bubbles came to the top pretty easily after mixing. But I also poured really slowly from a high distance from the mold to stretch out and break any remaining bubbles (a trick I learned from watching their youtube vids). As you can see, it's pretty clear in the mold.


    After a day and a half of curing, I started pulling out the pieces. They popped out no problem. Looks like an ice cube lol..


    And here's all the pieces out. I printed up a placeholder to keep them all organized.


    2nd set made.. some pieces aren't as clear as others mostly because I couldn't apply the XTC over 100% of the original print (particularly the middle area), so the rough surfaces transferred over to the clear resin pieces. I'll just have to add more glazing to those pieces and then it will all look uniform.


    3rd set..


    ..and finally 4th set!


    I added the back bezel to give you an idea of how it's going to look when finished.


    ..and of course I had to see what it would look like lit up..


    Can't wait to wrap this thing up!
    www.bods-mods.com

Page 2 of 3 FirstFirst 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Similar Threads

  1. Cosmos Cruizer by Brian “Boddaker” Carter
    By Dewayne in forum Featured Rig of the Month
    Replies: 0
    Last Post: 03-10-2015, 07:35 AM
  2. Boddaker - Thermaltake Level 10 GT - COD MW3
    By Boddaker in forum Thermaltake Level 10 GT Case Mods Work Logs
    Replies: 88
    Last Post: 02-24-2012, 11:37 PM
  3. Mods by Boddaker Updated 2/15/12
    By Boddaker in forum Case Mod Gallery
    Replies: 34
    Last Post: 12-09-2011, 06:16 PM
  4. ION Spider PC by Roboduck and Boddaker
    By Boddaker in forum NVIDIA ION Mods Work Logs
    Replies: 66
    Last Post: 11-30-2009, 08:10 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •