Results 1 to 10 of 21

Thread: [Build Log] Metroid -A 3D printed computer case

Threaded View

  1. #1

    [Build Log] Metroid -A 3D printed computer case

    Hi guys, I'm 8-Bit Builder. I've been doing this for about 10 years now and just starting up my newest build. I build cases in the an old pixelated style as you will see shortly .

    I've been wanting to build a Metroid computer case for about 7 years now but plastic was always too expensive ($1 a cube) compared to .08 cents a cube of wood which is what all my previous PC mods are made out of. Once I found out how accessible 3D printers were, I jumped head first and picked up a Maker Select. After a few months of non-stop printing it dawned on me that I could make the Metroid computer case I've been thinking about for such a long time. Normally I spend about 200-250$ in wood/paint but 3D printing plastic is really cheap in comparison, about $80 in plastic. I'm also planning on having a really cool light sequence on the inside of the case to get the red effect of the in game Metroid. Being my first foray into a 3D printed computer I'm sure I'll run into issues but look forward to overcoming them. This will also be my first time with programmable LED's so it will be a learning experience on that front also! I'm going with an ASUS STRIX for the Aura Sync capabilities since this case is going to have a big focus on lighting. The more advanced lighting will be done with the Tinkerboard.

    Expectations:
    A strong gaming pc
    100s' of LEDs programmed inside for a light show
    95% 3D printed


    Components:
    ASUS has sponsered/supplied me with components for this mod (Really appreciate it) and also in the past on my Airship PC Case seen here: https://www.youtube.com/watch?v=Cz5muWnFMmg


    ASUS ROG STRIX X370-I GAMING AM4 AMD X370 SATA 6Gb/s USB 3.1 Mini ITX AMD Motherboard



    ASUS GeForce GTX 1080 TURBO-GTX1080-8G 8GB 256-Bit GDDR5X PCI Express 3.0



    16 GB of ram
    1TB SSD
    Asus Tinkerboard with a few hundred LEDs programmed in a cool light show

    And heres some photos of my past work:

    Airship from Final Fantasy


    Link from Zelda


    And a 3D model I've printed, Calcifer from Howl's Moving Castle



    Ok on to the build! This is what I'm building (modeled in 123Design/Tinkercad):
    Metroid from ...Metroid!


    The modeled case


    My first idea of how the components will fit


    I started printing and doing test pieces to make sure I had it down pretty good and to test strength of the frame. Needless to say, it holds a LOT of weight (I weigh 185lbs)


    I've got the printer going in earnest on the final design now. The printer will be going non-stop for about 2-3 weeks to get all the pieces done. I'll be back soon though with photos of attaching sections together with glue and 3D pen welding!

    If you have any questions or ideas, feel free to ask
    Last edited by thorkon; 02-09-2018 at 03:05 PM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 9
    Last Post: 05-30-2019, 08:27 PM
  2. Replies: 7
    Last Post: 01-15-2019, 04:41 AM
  3. Dark Matter (Scratch Build) W/3D Printed Parts
    By Envious Mods in forum Modding Work logs
    Replies: 80
    Last Post: 07-22-2016, 03:22 PM
  4. New build batmobile computer ITX build
    By yericl in forum Modding Work logs
    Replies: 0
    Last Post: 07-05-2014, 05:21 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •