So you got the fever of case modding and you want to start to design your own case, but you don’t want to just jump in a cut up a perfectly good case. Then this is what you need, SketchUp.

     One of the first mods usually done to a case is the window mod. It shows off almost all the other mods, hardware and hard work done in a system. The material that goes in every window and many other mods is clear plastic, better known to Modders as plexiglass or acrylic. This is a Look into the basic tools and techniques for working with this material.

   A multimeter is a handy tool when used correctly... but do you really know how to use one?  If you don't then this article can help to bring you up to snuff in no time flat.  The device is explained in detail and will help you understand the full potential of a multimeter as a must have modders tool.

     Choosing the right PSU for your modded system can sometimes be a challenge, but the information contained within this Modding 101 should help make choosing the right PSU for your PC a little easier.

  When you need to control a fan or some lights that do not need to be on all the time you will want to install a switch. What kind of switch to use is the first question you will ask, the answer depends on how you want to be able to control it. Switches can be  a little intimidating if you do not know how they work. After reading this guide I hope that you feel a bit more comfortable when choosing and working with switches.