Top ad

Collapse

GIGABYTE 30th Anniversary Mod Challenge - Orange Nexus

Collapse

Announcement

Collapse
No announcement yet.
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
    crowTrobot
    Administrator

  • crowTrobot
    replied
    This build looks so slick and showroom quality clean. Your cables are very nice too which many often overlook.

    Thank you very much for participating and good luck in the competition.

    Leave a comment:


  • FrozenQ42
    replied
    Final post!

    Click image for larger version

Name:	IMG_4419.jpg
Views:	1
Size:	37.4 KB
ID:	39461

    Click image for larger version

Name:	IMG_4420.jpg
Views:	1
Size:	34.6 KB
ID:	39465

    Click image for larger version

Name:	IMG_4430.jpg
Views:	1
Size:	27.5 KB
ID:	39477

    Click image for larger version

Name:	FINAL 1.jpg
Views:	1
Size:	39.5 KB
ID:	39462

    Click image for larger version

Name:	ISO A.jpg
Views:	1
Size:	22.6 KB
ID:	39463

    Click image for larger version

Name:	ISO B.jpg
Views:	1
Size:	41.6 KB
ID:	39464

    Click image for larger version

Name:	IMG_4420.jpg
Views:	1
Size:	34.6 KB
ID:	39465

    Click image for larger version

Name:	IMG_4053.jpg
Views:	1
Size:	37.0 KB
ID:	39466

    Click image for larger version

Name:	IMG_4062.jpg
Views:	1
Size:	39.7 KB
ID:	39467

    Click image for larger version

Name:	IMG_4064.jpg
Views:	1
Size:	46.9 KB
ID:	39468

    Click image for larger version

Name:	IMG_4066.jpg
Views:	1
Size:	17.6 KB
ID:	39469

    Click image for larger version

Name:	IMG_4067.jpg
Views:	1
Size:	26.2 KB
ID:	39470

    Click image for larger version

Name:	IMG_4209.jpg
Views:	1
Size:	38.4 KB
ID:	39471

    Click image for larger version

Name:	IMG_4074.jpg
Views:	1
Size:	26.2 KB
ID:	39472

    Click image for larger version

Name:	IMG_4079.jpg
Views:	1
Size:	31.6 KB
ID:	39473

    Click image for larger version

Name:	IMG_4206.jpg
Views:	1
Size:	24.9 KB
ID:	39474

    Click image for larger version

Name:	IMG_4209.jpg
Views:	1
Size:	38.4 KB
ID:	39471

    Click image for larger version

Name:	IMG_4211.jpg
Views:	1
Size:	42.3 KB
ID:	39475

    Click image for larger version

Name:	IMG_4213.jpg
Views:	1
Size:	32.1 KB
ID:	39476

    Leave a comment:

  • crowTrobot
    Administrator

  • crowTrobot
    replied
    Final reminder for the deadline which is tomorrow November 15, 11:59 PST.

    For those having trouble editing their profile on the Gigabyte mod2win website, the registration has been reopened so users can either resubmit a profile or leave a message here so I can forward to Gigabyte and they can re-open the account on their end.

    Leave a comment:

  • crowTrobot
    Administrator

  • crowTrobot
    replied
    Reminder for entrants with 3 days left for the competition (ends November 15, 2016. 11:59 PST), all worklogs must be updated up to the final build and all photos uploaded to the Gigabyte Mod2Win website in order to be considered for the final judgment. This is to match the entry submitted in the profile with the worklogs posted here.

    -------------------------------------
    Completing your Modder Profile:
    -------------------------------------
    1. Requirements for mod submission:
    ◦ The title of your mod entry.
    ◦ A description and concept of your mod entry.
    ◦ At least five pictures of your final mod entry with external and internal aesthetics (preferably high resolution, jpg file format, maximum size 1MB).
    ◦ At least one picture of your final entry with clearly recognizable GIGABYTE components (must be specified).
    ◦ One picture of your final entry with a hand written time-stamp for verification.

    2. Submitting your completed mod:
    Press the Complete Profile button under your profile - Complete Profile page: http://event.gigabyte.us/mod2win/pro...ompleteprofile
    ◦ Once you complete your project, this will be considered your final submission and you will not be able to make further changes to your profile page.


    Entries that do not satisfy all stated rules on this page will be automatically disqualified.!

    Leave a comment:

  • crowTrobot
    Administrator

  • crowTrobot
    replied
    Looking lovely, good luck!

    Leave a comment:


  • FrozenQ42
    replied
    Alright! The final update is here, and we're 100% complete. Enjoy.

    Click image for larger version

Name:	58.jpg
Views:	1
Size:	40.1 KB
ID:	39421

    As I usually do with all my sponsored builds, I like to incorporate their logo's somewhere on the case. I though it might be a cool idea to laser etch them on an orange plate and light it up. The cut out in the middle is to install a temp sensor LCD readout. Which is going to be for monitoring the general temp of the inside of the case.

    Click image for larger version

Name:	59.jpg
Views:	1
Size:	40.0 KB
ID:	39422

    Installing a white LED strip which will edge light the sponsor plate.

    Click image for larger version

Name:	60.jpg
Views:	1
Size:	36.1 KB
ID:	39423

    Plate installed with matte black shroud to cover the standard HDD's

    Click image for larger version

Name:	61.jpg
Views:	1
Size:	33.5 KB
ID:	39424

    Another angle.

    Click image for larger version

Name:	62.jpg
Views:	1
Size:	32.1 KB
ID:	39425

    I didn't like the small area near the SLI bridge that was just flat bare metal. So I came up with an idea to do an acrylic inset graphic of the word WARNING, as it appears on the Asiimov skin.

    Click image for larger version

Name:	63.jpg
Views:	1
Size:	30.1 KB
ID:	39426

    Peeled off.

    Click image for larger version

Name:	64.jpg
Views:	1
Size:	51.0 KB
ID:	39427

    Installed!

    Click image for larger version

Name:	65.jpg
Views:	1
Size:	45.8 KB
ID:	39428

    Hard to see here, but I installed a matte black mid plate to hide the cables going into the back of the motherboard (USB and whatnot) as well as some of the power cables. There is a bank of 3pin power connectors right behind that, and I didn't like how visible they were when the smoked side panels were on.

    Click image for larger version

Name:	66.jpg
Views:	1
Size:	49.4 KB
ID:	39429

    Here it is in all it's glory, with the final step done. I added an L shaped cover to the side of the rear radiator to mask the light from the LED's on the side of the fans and just to give an overall cleaner look in the back.

    I want to add a small 30th Anniversary portion down near the PSU bay, so I'll probably get that done tomorrow and then reshoot some final photos!
    Last edited by FrozenQ42; 11-12-2016, 06:57 AM.

    Leave a comment:

  • crowTrobot
    Administrator

  • crowTrobot
    replied
    Hi, just a couple of friendly reminders as the deadline approaches:

    1.) All required photos have to be uploaded up at http://event.gigabyte.us/mod2win/login/ as well.
    2.) Modder Profile and worklogs must be completed to be considered for final selection.
    Completing Your Worklog:
    -Post images and a description of your mod progress to the thread you created in the Modders Inc. forum under GIGABYTE 30th Anniversary Mod Challenge.
    -If you are entering with a completed or 'in progress' mod:
    *You must be able to provide a full worklog from start to finish with images and a description.
    *Your mod must not have started earlier than June 1, 2015.
    *Your mod cannot be an entry from a previous GIGABYTE Mod Contest.

    Completing your Modder Profile:
    -Requirements for mod submission:
    *The title of your mod entry.
    *A description and concept of your mod entry.
    *At least five pictures of your final mod entry with external and internal aesthetics (preferably high resolution, jpg file format, maximum size 1MB).
    *At least one picture of your final entry with clearly recognizable GIGABYTE components (must be specified).
    *One picture of your final entry with a hand written time-stamp for verification.

    -Submitting your completed mod:
    *Press the Complete Profile button under your profile - Complete Profile page.
    *Once you complete your project, this will be considered your final submission and you will not be able to make further changes to your profile page.

    Entries that do not satisfy all stated rules on this page will be automatically disqualified.

    Cheers! Thank you for your participation and good luck in the competition.

    Leave a comment:


  • FrozenQ42
    replied
    Click image for larger version

Name:	41.jpg
Views:	1
Size:	39.4 KB
ID:	39389

    Special thanks to the guys over at In Win for providing one of their new Signature Series power supplies. I generally don't care too much about power supplies so long as they work, but this beauty has a full brushed aluminum casing, which goes perfect with the case.

    Click image for larger version

Name:	42.jpg
Views:	1
Size:	44.4 KB
ID:	39390

    Click image for larger version

Name:	43.jpg
Views:	1
Size:	34.1 KB
ID:	39391

    Click image for larger version

Name:	40.jpg
Views:	1
Size:	48.6 KB
ID:	39392

    Some white AF120 from Corsair. I've used these in a few builds now, and apart from them moving a lot of air, and being more toward the quiet side, I think they give one of the best "fan/blade" lighting effects.

    Click image for larger version

Name:	44.jpg
Views:	1
Size:	41.0 KB
ID:	39393

    Attached 3 of those to the rear triple radiator.

    Click image for larger version

Name:	45.jpg
Views:	1
Size:	49.2 KB
ID:	39394

    Zoom out of all the fans installed. You'll notice I replaced the ones in the lower radiator just to make everything match better.

    Click image for larger version

Name:	46.jpg
Views:	1
Size:	58.4 KB
ID:	39395

    I cut a matte black grill for the front here, as I thought the bare metal X frame up front looked a little silly.

    Click image for larger version

Name:	36.jpg
Views:	1
Size:	45.7 KB
ID:	39396

    Hardline fittings! Time for the fun stuff!

    Click image for larger version

Name:	48.jpg
Views:	1
Size:	39.6 KB
ID:	39397

    The first run goes from the GPU up to the triple rad, and was pretty straight forward using two 45 degree bends.

    Click image for larger version

Name:	49.jpg
Views:	1
Size:	42.3 KB
ID:	39398

    Underneath the GPU's I had to do a pretty tight to the floor run for the feed from the pump to the first radiator. The system goes Pump > Dual Rad > GPUs > Triple Rad > CPU > Res

    Click image for larger version

Name:	51.jpg
Views:	1
Size:	49.4 KB
ID:	39399

    Click image for larger version

Name:	52.jpg
Views:	1
Size:	44.4 KB
ID:	39400

    Here you can see the most fun little part, where I had to run a U shaped bend to get from the SLI bridge adapter down to the lower radiator. Nothing really lined up so this was the best way to tackle this.

    Click image for larger version

Name:	53.jpg
Views:	1
Size:	46.7 KB
ID:	39401

    Here you can see the run from the CPU to the reservoir which had to be split between into two pieces using an adapter.

    Click image for larger version

Name:	56.jpg
Views:	1
Size:	53.1 KB
ID:	39402

    Obligatory leak testing!

    Click image for larger version

Name:	57.jpg
Views:	1
Size:	51.6 KB
ID:	39403

    And there we have it in it's current state. Up next is the remainder of the decorative acrylic panels for the back and top sections.

    Leave a comment:

  • DDCustomMods
    Case Modder

  • DDCustomMods
    replied
    Looking great! I personally really like the design on the exterior portion of the case. Never been a fan of the hexagon.... but I think the grey pattern on the front really brings the black and orange together.

    Leave a comment:

  • NavyChief
    Sanded

  • NavyChief
    replied
    Looking great!

    Leave a comment:


  • FrozenQ42
    replied
    Putting everything back together!

    Click image for larger version

Name:	29.jpg
Views:	1
Size:	37.4 KB
ID:	39370

    I decided since that we weren't using all the HDD bays that the space would be better suited to making a nicer looking sponsor logo light box. Pretty easy to drill out the rivets and remove this part. In some cases the rivets can really be in difficult locations, but this was pretty straightforward.

    Click image for larger version

Name:	30.jpg
Views:	1
Size:	42.4 KB
ID:	39371

    Laying the aluminum frame next to the internal frame.

    Click image for larger version

Name:	31.jpg
Views:	1
Size:	43.3 KB
ID:	39372

    Securing the internal frame back into the case.

    Click image for larger version

Name:	32.jpg
Views:	1
Size:	49.7 KB
ID:	39373

    The two Antec TruQuiet 120mm fans I'll be using for the lower radiator. (Note: These later got changed out to Corsair AF120's)

    Click image for larger version

Name:	33.jpg
Views:	1
Size:	48.8 KB
ID:	39374

    Sleeved UV orange with Ultimate Personal Computers AEGIS Sleeving.

    Click image for larger version

Name:	34.jpg
Views:	1
Size:	47.9 KB
ID:	39375

    Attached to the dual radiator and ready to drop in.

    Click image for larger version

Name:	35.jpg
Views:	1
Size:	46.5 KB
ID:	39376

    Lower dual radiator secured and ready to go.

    Click image for larger version

Name:	37.jpg
Views:	1
Size:	41.6 KB
ID:	39377

    Lining up the decorative shroud that I made for the bottom portion. This will cover all the metal bits from the fan and radiator mounts, and also conceal where the GPU power cables connect to their extensions.

    Click image for larger version

Name:	38.jpg
Views:	1
Size:	36.9 KB
ID:	39378

    Peeled off the protective film revealing the matte black surface, and glued in the orange inserts.

    Click image for larger version

Name:	39.jpg
Views:	1
Size:	37.6 KB
ID:	39379

    Attached the side panel with the hex design.

    Click image for larger version

Name:	47.jpg
Views:	1
Size:	36.4 KB
ID:	39380

    Gluing the orange inserts into the hex design.

    Click image for larger version

Name:	50.jpg
Views:	1
Size:	35.9 KB
ID:	39381

    All finished!

    Click image for larger version

Name:	55.jpg
Views:	1
Size:	33.2 KB
ID:	39382

    Final shot with the side shroud reattached.

    Leave a comment:


  • FrozenQ42
    replied
    The new beauties that will be going into this build.

    Click image for larger version

Name:	LE1.jpg
Views:	1
Size:	17.0 KB
ID:	39348

    Click image for larger version

Name:	LE2.jpg
Views:	1
Size:	13.4 KB
ID:	39349

    Click image for larger version

Name:	LE3.jpg
Views:	1
Size:	10.8 KB
ID:	39350

    New Components and Test Fitting

    X99 Phoenix SLI from Gigabyte. Honestly, this has to be my favorite board I've ever had the pleasure of working with. It's not often you get a motherboard that perfectly fits the style of your build. Lest we not forget, the board has a ton of features, which in a later post, once the build is complete, I'll do a short review on.

    Click image for larger version

Name:	10.jpg
Views:	1
Size:	32.4 KB
ID:	39351

    Click image for larger version

Name:	8.jpg
Views:	1
Size:	24.7 KB
ID:	39352

    Click image for larger version

Name:	8.jpg
Views:	1
Size:	24.7 KB
ID:	39352

    Click image for larger version

Name:	9.jpg
Views:	1
Size:	29.8 KB
ID:	39353

    Corsair Dominator Platinum Memory. I've always been a fan of Corsairs memory, for two reasons. I am a big fan of the simple, yet sleek design that doesn't look out of place in most builds. They offer pretty much everything from low profile, to large high performance in a variety of colors that work for various schemes and if they don't (in this case the Dominator Platinum), it's usually designed in such a way that it's neutral but still lends to the "high quality" look you want in a build like this.

    The second is quality. I think I've probably used over 20 Corsair memory kits over time, and have not once had a single problem that required an RMA.

    Click image for larger version

Name:	11.jpg
Views:	1
Size:	32.9 KB
ID:	39354

    Click image for larger version

Name:	12.jpg
Views:	1
Size:	20.4 KB
ID:	39355

    Some pictures of me test fitting the board and memory into the internal case frame just to see how it looked.

    Click image for larger version

Name:	13.jpg
Views:	1
Size:	37.2 KB
ID:	39356

    Click image for larger version

Name:	14.jpg
Views:	1
Size:	42.9 KB
ID:	39357

    Click image for larger version

Name:	15.jpg
Views:	1
Size:	35.9 KB
ID:	39358

    Click image for larger version

Name:	16.jpg
Views:	1
Size:	37.4 KB
ID:	39359

    Click image for larger version

Name:	17.jpg
Views:	1
Size:	35.7 KB
ID:	39360

    - - - Updated - - -

    Painting the Case

    Got the outer frame of the case removed. Honestly, this is by far one of the nicest things about this case. The super thick aluminum shell comes off the internals by just a few screws. For modding purposes, this is an extremely nice feature.

    Click image for larger version

Name:	19.jpg
Views:	1
Size:	39.0 KB
ID:	39361

    Getting ready to get a coat of primer on here.

    Click image for larger version

Name:	20.jpg
Views:	1
Size:	39.2 KB
ID:	39362

    White pearl base coat applied.

    Click image for larger version

Name:	21.jpg
Views:	1
Size:	33.6 KB
ID:	39363

    After the base coat dried, Dan got to work on the vinyl detailing, applying some gloss black vinyl on the front and top.

    Click image for larger version

Name:	22.jpg
Views:	1
Size:	37.5 KB
ID:	39364

    Skipped ahead a bit here, but here's the finished product after he was done with it. After this it's going to be readied for clear coating, to protect the paint and keep the vinyl details from peeling up.

    Click image for larger version

Name:	24.jpg
Views:	1
Size:	42.1 KB
ID:	39365

    Custom GPU Backplates

    I was really excited for this part, because it's so simple and yet lends a really nice design element to the build. I started by measuring out the mounting holes on the GPU, and laser cutting a test piece.

    Click image for larger version

Name:	25.jpg
Views:	1
Size:	42.1 KB
ID:	39366

    The whole thing is made from two layers of 1/8" acrylic, the top being a really nice quality matte black. I used a pretty standard solvent to adhere the two layers.

    Click image for larger version

Name:	26.jpg
Views:	1
Size:	46.8 KB
ID:	39367

    Dropped and glued the colored inserts in.

    Click image for larger version

Name:	27.jpg
Views:	1
Size:	43.1 KB
ID:	39368

    And there you have it, much nicer than just the bare card showing in the middle of the case. The plate attaches to two of the free holes on the GPU that the water block doesn't use.

    Click image for larger version

Name:	28.jpg
Views:	1
Size:	40.6 KB
ID:	39369

    Next were going to get the internal frame put back in the case, and we'll get to work installing parts!

    Leave a comment:

  • DDCustomMods
    Case Modder

  • DDCustomMods
    replied
    Originally posted by Duality92 View Post
    but I don't want to compete against you, QQ
    You and me both man! My skill level is starting to push me farther down the list *laughs*

    Leave a comment:

  • Duality92
    Case Mod Editor

  • Duality92
    replied
    but I don't want to compete against you, QQ

    Leave a comment:

  • DDCustomMods
    Case Modder

  • DDCustomMods
    replied
    Originally posted by FrozenQ42 View Post
    I know right? It's really something you don't see a heck of a lot of, so super excited to have finally had the chance to do an orange build. The Gigabyte X99-Phoenix literally brought this build together for that reason.
    I didn't actually look up the motherboard.... I just did and man that's a sexy color scheme!

    Leave a comment:

Working...
X