Top ad

Collapse

2016 Staff vs Staff : The Book of Cain

Collapse

Announcement

Collapse
No announcement yet.
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 2016 Staff vs Staff : The Book of Cain

    "Hello, my friend. Stay awhile and listen."

    And such was my beginning into one of the most fabled and addicting games I had ever known. Spanning 2 additional sequels, Diablo set my imagination alight and brought many adventures to life!

    Through all of the chaos, all of the warnings, through the dire times when all seemed bleak... Deckard Cain and all of his knowledge was always there to advise and direct. His tome though... that massive binder of all things heaven and hell, was the key. I've been thinking about this mod for years... how could I build the Book of Cain? There weren't very many good and detailed pictures of it.
    Then, Diablo 3 arrived... and with it, was a Blizzard creation of the Book of Cain! An actual hard back, for purchase!
    Click image for larger version

Name:	e8e75e5247ca7cdc2ba6aee25d37b42e.jpg
Views:	2
Size:	65.2 KB
ID:	40768

    Click image for larger version

Name:	Page1.jpg
Views:	1
Size:	23.9 KB
ID:	40769


    Oh, and lets not forget that the book is shown in nicely rendered detail in the cutscene at the funeral pyre!!

    Click image for larger version

Name:	Screenshot020.jpg
Views:	1
Size:	15.3 KB
ID:	40770

    Click image for larger version

Name:	Screenshot022.jpg
Views:	1
Size:	14.4 KB
ID:	40771

    Click image for larger version

Name:	Screenshot024.jpg
Views:	1
Size:	11.9 KB
ID:	40772

    All of this totally set my mind ablaze! The book, the size!!!! Then the hardback which follows many of the rendered style and design queues!!! I now had my blueprint. Now.... how to build it???

    I've had it in my mind, but that dosent transfer well to a work log, so I sketched it out on paper, scanned it, and will post it up here.
    Click image for larger version

Name:	book1.jpg
Views:	1
Size:	26.1 KB
ID:	40773

    Essentially, the book will be constructed and framed from various thicknesses of wood panel. The left side of the book will have a monitor buried inside the left cover, the monitor will actually be covered with light weight paper so that an active image will show through. It will be the Diablo3 logo playing in a loop. The idea is to make it look like the paper has a magical energy permeating the pages, so much so that the logo is apparently "burning without burning" on the page. The other side (right side) of the book will house the system board, processor, memory, SSD drives and power supply. The sides will be covered in layered paper to give the look of a massive volume of ancient writings, bound together.

    Click image for larger version

Name:	book3.jpg
Views:	1
Size:	22.8 KB
ID:	40774

    All of the outer book designs, from the rear symbol, to the corner embellishments, to the rear binding reinforced with hinges, all have a place in the mod, and will be designed out to be cosmetic and partially functional.

    Click image for larger version

Name:	book2.JPG
Views:	1
Size:	24.9 KB
ID:	40775

    The great thing about this monitor is that it is one cable. Power and signal over USB3. It is slender, and the screen is responsive enough to pull off the animation.

    Click image for larger version

Name:	book4.jpg
Views:	1
Size:	23.6 KB
ID:	40776

    I have never done a scratch build before.... but I am so looking forward to this build.

    So.... "Stay awhile... and listen..."
    blingGreen, Lupine, BOSS FX-57, DSF... what's coming next? Stick around!
    http://www.tech-daddy.com

  • #2
    So I have to admit, some of what I am doing on this mod is using my X-CARVE from Inventables, and learning how to use it. For the frame that will house the monitor, I used some CNC trickery to pull off this frame design:
    https://youtu.be/NzqsAj_WOwY

    Click image for larger version

Name:	frame1.jpg
Views:	1
Size:	20.6 KB
ID:	39056

    The monitor that will be hidden in the back is a USB monitor from AOC.
    Single cable, USB3, for power and signal
    Click image for larger version

Name:	frame2.jpg
Views:	1
Size:	20.7 KB
ID:	39057

    It will lay in the framework facing the inside of the book:
    Click image for larger version

Name:	frame4.jpg
Views:	1
Size:	19.8 KB
ID:	39058

    Click image for larger version

Name:	frame5.jpg
Views:	1
Size:	20.3 KB
ID:	39059

    So, once I had the frame sizing dialed in, I started setting up the side walls for the "box shell", that I will be building around.
    break out the glue and clamps everyone.... lets flesh out the basic shape!
    Click image for larger version

Name:	glue1.jpg
Views:	1
Size:	21.6 KB
ID:	39060

    Click image for larger version

Name:	glue2.jpg
Views:	1
Size:	22.7 KB
ID:	39061

    Click image for larger version

Name:	glue3.jpg
Views:	1
Size:	22.8 KB
ID:	39062

    Click image for larger version

Name:	glue4.jpg
Views:	1
Size:	23.7 KB
ID:	39063
    blingGreen, Lupine, BOSS FX-57, DSF... what's coming next? Stick around!
    http://www.tech-daddy.com

    Comment


    • #3
      I give you win already :-)
      Cut it, Paint it, Mod it. Void Your Warranty
      #moddersinc @moddersinc
      youtube.com/c/moddersinc1
      twitter.com/moddersinc

      Comment


      • #4
        Well.... didn't finish by Quakecon (tips hat to Michael) so I have been focusing on wrapping up my day job distractions and trying to come up with the focused energy to make this mod what I know it can be!

        So, here is what I did...

        The Book of Cain corner embellishments are 3 layers of effects.
        Click image for larger version

Name:	e8e75e5247ca7cdc2ba6aee25d37b42e.jpg
Views:	2
Size:	65.2 KB
ID:	39117

        I then took the book image and isolated the corner, then printed it off at the 1:1 size that I need this book perspective to be.
        Click image for larger version

Name:	book_corner_large.jpg
Views:	1
Size:	51.6 KB
ID:	39118

        In order for me to cut these 3 pieces with the X-Carve, I literally printed this picture 3 times, and cut out the individual shapes and colored them black. I then taped them on to white paper and scanned them back into my computer. This stark contrast would allow me to save this picture as a 1 bit image, black and white. Scanning this image into the software for the X-Carve then becomes stupid simple, because it now has the edges of the shapes that I need it to cut!!!
        Click image for larger version

Name:	book_corners3.jpg
Views:	1
Size:	16.3 KB
ID:	39119

        Once imported, and set up, I had the X-Carve cut the shapes I needed. Effectively 3 shapes per corner, 8 corners = 24 pieces.
        I also needed to cut out the center embellishments. Center pieces of the front and back of the book covers. For this I employed some friends of mine that were *nuch* better with this type of work. They cleaned up the digital image and gave me the center shape I needed in the black/white format that was required.
        Click image for larger version

Name:	outline_black.jpg
Views:	1
Size:	16.5 KB
ID:	39120

        After cutting them out, I filed and sanded the edges down to clean up the shapes.
        Click image for larger version

Name:	D3_BoC_CornerEmblishments10.jpg
Views:	1
Size:	43.5 KB
ID:	39121

        I then got to use Worbla!!! If you have never used this stuff.... I highly recommend looking into it. Very popular in cosplay, I opted to cover the wood pieces in a layer of Worbla to give it more of a metal feel. I didnt want to just prime and sand the wood embellishments and paint them to look metal... wood has a certain feel. The worbla covering alters that texture, and gave me additional flexibility in creating the drawn out edges of the metal. Additionally, once painted, the surface will not feel like painted wood.
        Click image for larger version

Name:	D3_BoC_CornerEmblishments08.jpg
Views:	1
Size:	38.9 KB
ID:	39122

        Click image for larger version

Name:	D3_BoC_CornerEmblishments09.jpg
Views:	1
Size:	29.5 KB
ID:	39123

        Click image for larger version

Name:	D3_BoC_CornerEmblishments11.jpg
Views:	1
Size:	43.2 KB
ID:	39124

        After finishing up the basic worbla treatments, I put them on the book frame to test perspective, size and general fit.
        Click image for larger version

Name:	D3_BoC_CornerEmblishments03.jpg
Views:	1
Size:	41.7 KB
ID:	39125

        After taking that picture, I did a quick mockup using the brown leather I intend to use for the book binding:
        Click image for larger version

Name:	D3_BoC_CornerEmblishments01.jpg
Views:	1
Size:	68.8 KB
ID:	39126

        It is real leather, not sure of the hide. Cappuccino brown. The texture will make a nice design counter to all of the embellishments. Additionally, in the Blizzard Book of Cain, it looks like dragon scales, but unfortunately Tandy Leather was out of dragon leather when I went...
        Last edited by tech-daddy; 08-18-2016, 09:01 PM.
        blingGreen, Lupine, BOSS FX-57, DSF... what's coming next? Stick around!
        http://www.tech-daddy.com

        Comment


        • #5
          So, exciting updates to follow!!!

          So when working on the worbla coverings of the corner embellishments, I wrapped it under the pieces. This leads to them not sitting flat and flush.
          Click image for larger version

Name:	D3_BoC01.jpg
Views:	1
Size:	45.5 KB
ID:	39130

          So I needed to sand those down in order for all of the pieces to look uniform. Break out the Dremel with a sanding drum:
          Click image for larger version

Name:	D3_BoC02.jpg
Views:	1
Size:	43.6 KB
ID:	39131

          Ahhh! That's better!!!

          only.... 26... more......to...go.....
          Click image for larger version

Name:	D3_BoC03.jpg
Views:	1
Size:	59.8 KB
ID:	39132

          Well, got that knocked out! Time to get the leather on the book! The trick here was to get the leather around the book, keeping the proper distance between the pieces for the spline of the book. After I had my measurements out, and my pieces placed, I went out and purchased some E6000 adhesive. *STELLAR* stuff. Leather on wood is a difficult join to begin with. But then put the pressure of stretching the leather and the stress it puts on those edge joints. 6000 handled it fine. I used clamps and some pieces of flat aluminium stock to apply equal pressure around the frame.
          Click image for larger version

Name:	D3_BoC05.jpg
Views:	1
Size:	41.3 KB
ID:	39133

          Click image for larger version

Name:	D3_BoC06.jpg
Views:	1
Size:	37.2 KB
ID:	39134

          Click image for larger version

Name:	D3_BoC07.jpg
Views:	1
Size:	35.1 KB
ID:	39135

          Click image for larger version

Name:	D3_BoC08.jpg
Views:	1
Size:	36.0 KB
ID:	39136

          Click image for larger version

Name:	D3_BoC09.jpg
Views:	1
Size:	49.2 KB
ID:	39137

          Click image for larger version

Name:	D3_BoC12.jpg
Views:	1
Size:	38.0 KB
ID:	39138

          Click image for larger version

Name:	D3_BoC13.jpg
Views:	1
Size:	44.9 KB
ID:	39139

          Click image for larger version

Name:	D3_BoC14.jpg
Views:	1
Size:	34.6 KB
ID:	39140

          Click image for larger version

Name:	D3_BoC16.jpg
Views:	1
Size:	39.7 KB
ID:	39141

          Click image for larger version

Name:	D3_BoC17.jpg
Views:	1
Size:	37.7 KB
ID:	39142

          Click image for larger version

Name:	D3_BoC21.jpg
Views:	1
Size:	43.4 KB
ID:	39143

          Now, in that last picture, you can see that I have a gap in the wooden pieces. That is for the book spline. Initially, I was going to carve a solid piece of wood to make the desired shape, but quickly realized that when the book opened, the solid piece would not allow the spline the range of motion needed. So.... then I brainstormed and came up with the idea of flat, aluminium stock, cut into lengths that would allow the leather to bend naturally, but the stock would offer ribs of support.
          Close... but not good enough. I knew what I needed was on the tip of my tongue.... I just needed to think a bit more.
          Orrrrr, it was right in front of my eyes!

          Click image for larger version

Name:	D3_BoC22.jpg
Views:	1
Size:	43.0 KB
ID:	39144

          Bamboo blinds!!! PERFECT!!!

          I took the dimensions of that rectangular area previously, and had already cut a single piece of wood, so that acted as my template for how big of a piece of these blinds I needed. After tracing out my section on the blinds, I put dabs of hot glue on the string holding the blinds together, so that they would not fray apart. I then cut the blinds between the two rows of glue dots, and ended up with a piece of the blinds that was equivalent to the solid wood piece I had cut out earlier. I then placed that in the spline space between the pieces... and it worked PERFECTLY!!!!!!!!
          Click image for larger version

Name:	D3_BoC26.jpg
Views:	1
Size:	71.5 KB
ID:	39145

          Click image for larger version

Name:	D3_BoC29.jpg
Views:	1
Size:	57.6 KB
ID:	39146

          Click image for larger version

Name:	D3_BoC31.jpg
Views:	1
Size:	57.7 KB
ID:	39147

          Click image for larger version

Name:	D3_BoC32.jpg
Views:	1
Size:	59.9 KB
ID:	39148

          So very happy with how that came out....
          blingGreen, Lupine, BOSS FX-57, DSF... what's coming next? Stick around!
          http://www.tech-daddy.com

          Comment

          Working...
          X