.::District 9::. PRAWN PC 2010 CES mention with M-I&qu

[mnpctech Clear Coat Find all posts View Profile Close mnpctech]

.:istrict 9::. PRAWN PC 2010 CES mention with M-I&qu

Here is some screen shots taken from the movie trailer on Youtube. I think it's important to have the prawn canister implemented into the case. If Cooler Master had requested watercooling, it would been fun to make a reservoir based on the canister, but the system will be air cooled. We have some 2" diameter solid rod on hand we could use to re-create something close to it. I have some ideas, but want to have it my hands first before I commit to them.

[tech-daddy Super Moderator Find all posts View Profile Close tech-daddy]

.:istrict 9::. PRAWN PC 2010 CES mention with M-I&qu

You just dont stop impressing Bill.... damn!

[DarthBeavis Sanded Find all posts View Profile Close DarthBeavis]

.:istrict 9::. PRAWN PC 2010 CES mention with M-I&qu

Bill, the only thing I hate about this project is I have not seen the movie . . .arg. So need to get an HD copy of it . . .

Love what you are doing here. Also should drop props to Bill for sponsoring a n00b modder over at PDXLAN. Bill you made the young man's day!!!! Thanks for supporting our community brother. Someday I hope I can buy you a Jager Bomb. Would also like an autographed CPU Mag with your rig on the cover

[razer121 Master Modder Find all posts View Profile Close razer121]

.:istrict 9::. PRAWN PC 2010 CES mention with M-I&qu

bill...what can i say!! ive lost count how many times ive said this and will keep saying it in the future im sure but damn, you keep impressing me, those bullet holes look awesome! see if i tryed that i think it would of just looked like bad holes punched into the case lol

[ChrisChurchill Find all posts View Profile Close ChrisChurchill]

.:istrict 9::. PRAWN PC 2010 CES mention with M-I&qu

Absolutely amazing as always. Very realistic bullet holes. I haven't seen this movie yet, but I'll defiantly check out the DVD when it comes out (Dec 22nd).

[mnpctech Clear Coat Find all posts View Profile Close mnpctech]

.:istrict 9::. PRAWN PC 2010 CES mention with M-I&qu

Thanks for the kind words! Your positive feedback fuels me onward dudes..

We will hook up at some point Darth, no doubt!

Luckily we've got 2" diameter aluminum rod on hand, I'm cutting done a 12ft stock piece to 8" length today, I think thats pretty close to the movie prop. Once I've got the physical piece in my hand, ideas should start flowing.

[mnpctech Clear Coat Find all posts View Profile Close mnpctech]

.:istrict 9::. PRAWN PC 2010 CES mention with M-I&qu

These are the diamond knurl machined aluminum case feet shown in the original concept. The 840 comes with feet, but these fit the industrial theme. The only modding necessary was drilling out the existing threaded holes with 3/16 drill bit for 8/32 screws included with diamond knurl feet.

Diamond Knurl Computer Case Feet
http://www.mnpctech.com/Aluminum_Computer_Case_Feet.html

[mnpctech Clear Coat Find all posts View Profile Close mnpctech]

.:istrict 9::. PRAWN PC 2010 CES mention with M-I&qu

2" diameter aluminum rod. The Prawn canister will illuminated from inside, and located in the 5.25 drive bay

[mnpctech Clear Coat Find all posts View Profile Close mnpctech]

.:istrict 9::. PRAWN PC 2010 CES mention with M-I&qu

Brad gave me access to his paint shop last night, to do the White and Orange paint





The "Pumpkin" Orange color was done first. The perimeter of the " exploded hole" will be airbrushed by Brad with a burned surface effect

[mnpctech Clear Coat Find all posts View Profile Close mnpctech]

.:istrict 9::. PRAWN PC 2010 CES mention with M-I&qu

The Cooler Master 840 chassis painted with Semi-Gloss White

[mnpctech Clear Coat Find all posts View Profile Close mnpctech]

.:istrict 9::. PRAWN PC 2010 CES mention with M-I&qu

Once everything is assembled, all of the details like weathering, graphics, and effects can be airbrushed on the exterior like the concept drawing.



Left side panel, the hole will have burned effect airbrushed on later


Right side panel


Cooler Master sent over 3x 230mm red led fans, 1x for front intake, 2x top exhaust






The 840 normally comes with Black frame 230mm fans, no leds.

[AWP_Sniper Find all posts View Profile Close AWP_Sniper]

.:istrict 9::. PRAWN PC 2010 CES mention with M-I&qu

Can't wait to see how the canister is gonna come out, keep it up =]

[mnpctech Clear Coat Find all posts View Profile Close mnpctech]

.:istrict 9::. PRAWN PC 2010 CES mention with M-I&qu

Thanks! It should be fun to see in the PC. I've had this .5" x 25" flexible conduit lying around, I've always wanted to use it for routing cables. It fits the industrial theme. I've also got .25" i.d. flexible conduit.

[AWP_Sniper Find all posts View Profile Close AWP_Sniper]

.:istrict 9::. PRAWN PC 2010 CES mention with M-I&qu

Isn't that the same thing they use for a shower hose?

would definitely look awesome
I'm working on a mod myself and I thought of using Chrome sleeving by Techflex
but that looks way better

[cheapskate Sanded Find all posts View Profile Close cheapskate]

.:istrict 9::. PRAWN PC 2010 CES mention with M-I&qu

lol, conduit snake. It should look absolutely vile if it's painted black. What are you going to use for end caps?